The measurement element of this positive displacement oval gear meters consists of two precision oval gears. The revolution can be sensed by a magnetic-field-controlled pulse generator, resulting in only two moving parts i.e “oval-wheels”. These oval gear meters can be used for application of nearly all operating condition.

• Very high / very low temperatures
• Low and extreme high viscosities
• Nominal Diameter DN 4 to DN 400
• Operation pressures upto 100 bar

Conditionally suitable at low upstream pressures

Turbine meters are indirect volumetric meters. The revolutions of the turbine wheel in these turbine flow meters are proportional to the volume passing through the meter. Turbine flow meters are suitable for measurement of-

• Low viscosity liquids (e.g. L.P.G)
• Mineral oil products
• Crude oil with high viscosity

Nominal diameter: DN 10 to DN 600 
Measuring range : up to 10,000 m³/h
Temperature : 196- 250^o C 
Pressure : up to 100 bar

The fluid to be measured passes through the oscillating element. Excited electro-magnetically, it will oscillate with its natural frequency. The frequency will be picked up by the transmitter and converted into a signal proportional to density or concentration. 


 

Measuring principle is by the rate of flow measurement by the differential pressure method. It is basically calculated by the use of Bernoulli equation. The differential pressure is a measure of flow rate.

Nominal diameter: DN 15 to DN 1400
Pressure : up to 100 bar and above

The transit time flow meter measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid going upstream and downstream of a pipe. For ultrasonic flow meter it is not necessary to stop the flow to install them.

We offer water meters for various application and of various types. From our range of water meters and water flow meters, we have single jet, multijet and woltman type. These positive displacement magnetic drive Sealed Register water flow meters are available in various sizes. High temperature (upto 130^o C) is standard in these water meters.

Universal measuring method without moving parts in electrically conductive measured media of these magnetic meters. 
No moving parts and a free cross section result in zero pressure loss and provide ideal cleaning condition in these magnetic flow meters.

Analysis of inputs of any volume meters, turbine meter, vortex meter, cone meter etc., calculation and logging of flow, volume, nominal volume, mass and energy.

The next generation Flow Computer, only from Dynamic Flow Computers. They are designed to cover today's measurement and control requirements no matter what they may be.

Multi Bi-directional run, DIN Rail mounted or field flow computer can be used for all liquid and gas applications, including custody or non-custody measurement.

Features:

• RS 485 communication
• Solar powered option
• AGA, API approved
• Field mounted instrument

• Digital Rate Indicator/ Totaliser
• Batch Controller
• Large 17 mm display
• Analog 4-20 ma o/p ,pulse o/p available
• RS 485 / RS 232 communication.
• ATEX , CCOE approvals available.

Strainers for Liquids Application: For protection of meter in the pipe system against foreign matters and solids contained in the liquids measured.

Centrifugal gas separator are used to avoid measuring error caused by the air or gas bubbles in the measurement of liquids.

Our Gas Meter Model GS Diaphragm applies to measure the consumption of coal gas, liquefied petrol gas and natural gas.It can also be used to measure the flow rate of air and other gases.