4JP 06 Joystick Controlled Pilot Oil Unit is a Manual Joystick control valve, meant for providing variable pilot pressure to the hydraulic components like Proportional Pilot Operated Directional Control Valves, Pumps and motors etc., which need variable pilot pressure to control their outputs. The valve has two pairs of outlets, which can be operated independently or in tandem. Depending upon the Joystick tilt, the valve provides variable pressure to one or two of its outlets at a time. The pilot pressure can be regulated in the pressure range of 6 to 19 bar.

.

Heavy duty construction with hardened and ground plunger. Both suction and delivery valve seats are replaceable. Intended for supply of lubricating oil or pilot pressure.

.

Pilot oil unit series 4JP are intended for giving sensitive pressure signals to pumps, Valves or Hydraulic motors which need to be controlled by remote pilot pressure. Functioning of these valves is based on spool type direct acting pressure reducing valve principle.

.

Currently we are supplying this valve to 

• L&T John Deere for Tractors
• Telcon for Tata - John Deere Back Hoe Loaders.

.

Lock valve, basically two position directional control valve designed to have flexibility in diverting the flow. The valve is provided with single pump connection, three common ports designated as 'A' and four common tank ports designated as 'T'. In normal position, pump flow is connected to A ports and at an angle in between 78° - 100° port A is connected to tank with throttling effect.

Currently we are supplying this valve to 

• Telcon for Tata - Hitachi Excavators.

.

Currently we are supplying this valve to 

• Telcon for Tata - John Deere Back Hoe Loaders.

.

Currently we are supplying this valve to 

• Hyva India.Currently we are supplying this valve to 

  Hyva India.

.

Currently we are supplying this valve to 

• Telcon

.

Currently we are supplying this valve to 

• Telcon

.