Direct solenoid operated, spool type, mounting on ISO 4401-03-02.

Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance. Wet pin DC solenoids ensure better heat dissipation, quitter operation, there by increasing solenoid life. Moulded solenoid coils eliminate moisture problems and ingress of dust. Plug-in-coils for ease of maintenance. Indicator lights are a standard option.

.

4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils and wide variety of spool types with spring centered and spring-offset arrangements.

Five chamber body and spool design to facilitate high flow. 

• Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05 interface.
• Available in 52 standard, interchangeable spool configurations.
• Removable wet-armature AC and DC solenoids for quick replacement and conversions. Moulded solenoid coils to protect against moisture and ingress of dust. 
• Individual solenoid plug-in connectors with indicator lights to ISO 4400 and DIN 43650. 
• Special R-rings for high extrusion resistance. Increased stability under high dynamic condition.
• Override for operation of valve without electrical power. 

Note on solenoid identification : Solenoid "a" is close to Port "A" and Solenoid "b" is close to Port "B" for a direct operated valve.

.

4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils and wide variety of spool types with spring centered and spring-offset arrangements.

Five chamber body and spool design to facilitate high flow. 

• Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05 interface.
• Available in 52 standard, interchangeable spool configurations.
• Removable wet-armature AC and DC solenoids for quick replacement and conversions. Moulded solenoid coils to protect against moisture and ingress of dust. 
• Individual solenoid plug-in connectors with indicator lights to ISO 4400 and DIN 43650. 
• Special R-rings for high extrusion resistance. Increased stability under high dynamic condition.
• Override for operation of valve without electrical power. 

Note on solenoid identification : Solenoid "a" is close to Port "A" and Solenoid "b" is close to Port "B" for a direct operated valve.

.

4-port, spool type, directional control valves with hand lever actuation and wide variety of spool types with spring-centered, spring-offset and detent arrangements.Solenoid operated cartridge type directional control valve.

Sliding spool construction.

Wet pin solenoids ensure better heat dissipation, quieter operation, there by increasing solenoid life.

Moulded solenoid coils eliminate moisture problems and ingress of dust.

Plug-in-coils for ease of maintenance.

Indicator lights are a standard feature.

.

Completely encapsulated control mechanism for protection against dirt. Five chamber design. Flexibility in rotating the operating mechanism by 90° x 4. Wide variety of spools available in subplate model only.

.

Completely encapsulated control mechanism for protection against dirt. Five chamber design.  Wide variety of spools available both in subplate and threaded model.

.

Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.

.

Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.

.

Available as spring centered, spring offset Valve mounting interface conforms to International and National standards. Minimum pilot pressure is 5 bar.

.

Designed for single acting cylinders which are supposed to hold pressure. Ensures smooth decompression prior to return of the cylinder ram. Large return oil passage to reduce pressure drops, allowing rams to return under low external forces. Valves can be connected in series for independent multiple single acting cylinder operations.

.

Specially designed to control Up-stroking, gravity return, single acting hydraulic cylinders, where pressure holding, smooth de-compression and quick return of the ram is desired. These valves are totally encapsulated for trouble-free operations. valves with quick exhaust feature has large return passage to achieve extra fast return of the ram.

.

Designed for single acting cylinders which are supposed to hold pressure.
Specially suitable for rubber moulding presses. Ensure smooth decompression prior to return of the cylinder ram. Available as standard & Quick Exhaust. Large return oil passages allows rams to return under low external forces. Valves with quick exhaust feature have 2.34 times larger return passages. Provided with manual opening in case of power failures.
Valves can be connected in series for independent multiple single acting cylinder operations. The valve is actuated by a solenoid controlled pilot

.

A lever operated rotary type directional control valve is generally used for high pressure applications at low flow. These valves are used where leak-free closure is required.

.