Construction

• Body The main body consists of a stainless steel evaporator vessel. When the lid is put over the vessel, and it seals the recess around the head of the vessel.
• Condenser This incorporates a stainless steel condenser tube to condense the steam coming from the vessel, and delivers the distilled water through the outlet. A constant level attachment is provided to keep the water level constant in the vessel.
• Wall Bracket The water still can rest on a bracket that is supplied with it. The bracket (made of mild steel) should be fixed on a wall.
• Finish The entire body is fabricated in stainless steel.

Heating and Control

• Heating is carried out by immersion type electric heaters.
• Control No temperature control is necessary in this instrument. However, the flow of water through the inlet should be adjusted for a constant level. This is assured by water dripping out from the constant level attachment.

.

Construction

• Body Double walled. Inner made of thick gauge stainless steel, outer made of mild steel.
• Insulation Glass wool.
• Circulation With a motorized stirrer for agitation and uniform temperature..
• Finish Painted with enamel paint.

Heating and Control

• Heating is carried out by oil heaters.
• Control Temperature is controlled by an energy regulator.
• Temp. Range 5^OC above the ambient temperature to 200^OC maximum.
• Accuracy Better than ± 1^OC.

Specification

• Heater Rating 2 KW.
• Motor Rating 1/16 HP
• Oil Capacity 17 liters.
• Inner Dimension 32cm X 30cm X 14cm (above the false bottom).

.