Body Horizontal Rectangular. Outer body made of thick gauge mild steel.
Insulation Lagged with ceramic wool instead of conventionally used insulation bricks, to make the furnace light in weight and to minimize heat loss.
Finish Painted with enamel paint.
Heating and Control
Heating is carried out by heaters made of best quality Kanthal wire.
Control Temperature is controlled by an energy regulator and indicated by a pyrometer. For better accuracy and safety of the furnace, Digital Temperature Controller (PEW-202) and/or Solid State Fuse (PEW-204) can be provided at an extra cost.
Temp. Range 930OC or 1200OC maximum.
Accessories Supplied with Pyrometer, Cr/Al thermocouple, compensating cable and Thermal fuse.
Cabinet Double walled cabinet with outer made of mild steel, and inner chamber made of either mild steel or stainless steel as required.
Insulation Glass wool filled between the walls to a minimum thickness of 2 inch.
Outer door Outer door is fitted on heavy chrome plated brass hinges, and it contains a 'spring and roller ' type latch.
Inner door Inner door is made of glass and is provided with a magnetic latch.
Finish Outer side and inner sides (in case of mild steel) are painted with enamel paint.
Heating and Control
Heating is carried out by a specially designed low-rating heater.
Control The temperature is controlled by a thermostat. In PEW-60C, temperature is controlled by a solid-state temperature controller. For better accuracy and safety of the incubator, Digital Temperature Controller (PEW-202) can be provided at an extra cost.
Heat Transfer Heat transfer occurs by natural air convection (except in PEW-60C) with proper inlet and outlet. In PEW-60C, heat is re-circulated with the help of a motorized blower.
Temp. Range 5OC above the ambient temperature to 60OC maximum.
1
2
3
