NVT

Features

Designed for use with tubes through built in Double ferrule compression fittings for throttling purpose and straight shut off of liquids, gas or vapour service. These needle valves are available with a variety of end connections and stem packing.

.

G2VM1

Features

Two valve manifold is designed in a single block with female screwed inlet and outlet ports combining isolation valve and calibration /vent valve. Generally used on static pressure transmitters, switches and gauges.

.

G3 VMPF 1

Features

Designed for direct mounting on to standard differential pressure transmitters. This manifold block incorporates three valves, two main process isolation valves and one equalising valve. Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions.

.

G5 VMPP 1

Features

Five Valve Manifold G5 VMPP-1 incorporate two process isolation valves, one equalizer valve and two drain / vent valves with separate connections in a compact manifold block. The Model G5 VMPP-1 is designed for remote mounting away from the differential pressure instrument and joined by tube or pipe impulse lines. They have threaded connections of which the most popular are detailed below but also available to suit other sizes and standards. 

Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection. Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions.

.

GMFSBV

Features

Isolation valve for primary take offs, where the valve is directly mounted to the vessel or process pipe. Instruments may be directly mounted to the valve outlet or alternatively remotely mounted with gauge line / impulse pipe work.

.

GBV

Features

A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole or port,through the middle so that when the port is in line with both ends of the valve, flow willoccur. When the valve is closed the hole is perpendicular to the ends of the valve, and flow is blocked. The handle will be inline with the port position letting you “see” the valve position.

Ball valves are durable and usually work to achieve perfect shutoff even after years of disuse They are therefore an excellent choice for shutoff applications. They do not offer the fine control that may be necessary in throttling applications.

.