DPBL / LFDBPL / SFDPBL / LSDPBL

Features

Bellow type construction

Reference Standard: EN - 837

All SS internals

Chemical seal unit (optional) for process suitability

Accuracy ±1% FSD

A set of two stainless steel bellows mounted on a force balance enables direct reading of the actual differential pressure

Each Bellow of the pressure Gauge can withstand the full static pressure without any damage or shifting being caused to the instrument 

.

DPDS / LFDPDS / SFDPDS / LSDPDS

Features

General purpose differential pressure measurement

Sensing Element of Diaphragm

Wetted Parts in SS316 / SS316L / Monel / Hastelloy-C

Non-wetted parts & Case in Stainless Steel

Accuracy ± 1.6% FSD

Span of dial marking at 270 Deg Angle, even for very low ranges

.

DPDH

Features

General purpose differential pressure measurement
Sensing Element of Diaphragm
Wetted Par ts in SS316 / SS316L /  Monel / Hastelloy-C
Non-wetted parts & Case in stainless steel
Accuracy ±1.6% FSD

.

DPCP

Features

Low differential pressure measurement with high accuarcy

Sensing element - Capsule in SS316L

Screwed connection

Accuracy ± 1% FSD

General stainless steel capsule differential pressure gauges are designed for measuring small differential pressures on clean & dry air or gas system

.

DPMH /LFDPMH

Features

Magnetic Diaphragm / Piston type construction

Static pressure 35 bar & 100 bar

Body block - Aluminium / SS316 / SS316L

Screwed connection

Accuracy ± 2% FSD (Ascending)

Unit of measurement - kg/cm2, bar, mmWC

.

MODEL: DPMG

Features

“General” make Mag-DP Gauges are designed for measuring very low differential pressures. Minimum measuring range offered is as low as 0 to 6 mmWC(DP). The Mag-DP Gauges are suitable for measuring fan & blower pressures, filter resistance, furnace draft and pressure drop across orifice plates, etc. Mag-DP Gauges are designed to suit Flush Panel Mounting or Sur face (Projection) Mounting or Yoke (2” Pipe) Mounting as per requirement. For maximum accuracy, it is recommended to mount the Gauge in vertical position. Suitable mounting accessories are provided with each Gauge.

Diaphragm operated, with magnetic helical movement
Suitable for measuring very low differential pressure
Minimum measuring range as low as 0 to 6 mmWC(DP)
Silicone Rubber diaphragm (Buna-N for Hydrogen Service)
Body material – Aluminium

.

Features

Differential Pressure across orifice plate assembly

Weld Neck Flange connection

Unit of measurement direct in terms of flow unit

Weatherproof to IP - 68 (IS 13947 Part 1)

.