Capacity Ranging From : 5 - 50 CFM

Working Pressure : 3 TO 12 KGS/CM^2(g)

Outlet air quality according to ISO 8573 - 1, Table 3 - Class 3

Capacity Ranging From : 10 - 5000 CFM

Working Pressure : 3 TO 250 KGS/CM^2(g) Dew Point of out let Air:

(-) 40 Deg.C /(-) 60 Deg.C /(-) 80 Deg.C at Atm Pressure Type of Desicants Used : Activated Alumina / Molecular Sieve / Silicagel Outlet air quality according to ISO 8573 - 1, Table 3 - Class 3

• Capacity Ranging From : 10- 5000 CFM
• Working Pressure : 2 to 70 Kgs/Cm^2(g)
• Dew Point of out let Air: (+) 2-4 Deg.C at Line Pressure
• Type of Refrigerants used : R-12/ R-22 /R-134 A( Enviro Friendly)
• Air - cooled Version up to 1500 CFM / Water - Cooled Version up to 5000 CFM Outlet air quality according to ISO 8573 - 1, Table 3 - Class 4

Capacities Ranging from : 7.1 - 21.6 CFM.
Working Pressure : 10.5 Kgs/Cm^2(g).

* Compressors can be offered with different volumes and different Pressures, Mail us for further information.
Refer our Data Sheet for standard Compressors.

Capacities Ranging from : 28.0 -40.0 CFM
Working Pressure : 7.5 -13 Bar.
* Compressors can be offered with Integrated Dryer Type also as a single unit in Housed canopy.

Compressors can be offered without tank also i.e. on skid Mounting type. Contact us for further details.
Refer our Data Sheet for standard Compressors.

Capacities Ranging from : 68.1 -538.0 CFM Working Pressure

Compressors can be offered with Integrated Dryer Type also as a single unit in Housed canopy. Contact us for furtherdetails

Refer our Data Sheet for standard Compressors

Capacities Ranging from : 60.0 -136.0 CFM Working Pressure : 4 -10 Kgs/Cm^2(g) Complete system shall be offered on a skid mounting Type thereby no foundation is required and the system is ready for use.

You need to provide Cooling water and the powersupplyshould be provided.Compressors 
also can be offered as under.

A) "Air Cooled version in lieu of water cooled" skid mounting type.

B) As Silenced Version .
kindly refer our Air Dryer & Auxiliaries for obtaining 100% Moisture free air.

Capacities Ranging from : 60.0 -136.0 CFM
Working Pressure : 4 -10 Kgs/Cm^2(g)Complete system can be offered

"Air Cooled version in lieu of water cooled" skid mounting type thereby no foundation is required and the system is ready for use. You need to provide the power supply at the site.Complete system can be offered in a housed canopy as silenced version as an optional.

kindly refer our Air Dryer & Auxiliaries for obtaining 100% Moisture free air.

Capacities Ranging from : 158.0 -1610.0 CFM
Working Pressure : 4 -15 Kgs/Cm^2(g) Complete System shall be offered as Loose i.e Bare compressor & the accessories shall be supplied as individual Items and the same have to be integrated by the user at the site.Note compressors can also be offered as under.

A) Skid mounting Type thereby no foundation is required and the system is ready for use. You need to provide 
Cooling water and the power supply should be provided.

B) "Air Cooled version in lieu of water cooled" skid mounting type for Immediate usage.

kindly refer our Air Dryer & Auxiliaries for obtaining 100% Moisture free air.

Capacities Ranging from : 158.0 -1610.0 CFM
Working Pressure : 4 -15 Kgs/Cm^2(g) Complete system shall be offered on a skid mounting Type thereby no foundation is required and the system is ready for use.

You need to provide Cooling water and the power supply should be provided.For the above systems ,kindly refer our Air Dryer & Auxiliaries for obtaining 100% Moisture free air.

Capacities Ranging from : 158.0 -1610.0 CFM
Working Pressure : 4 -15 Kgs/Cm^2(g) Complete system shall be offered.

"Air Cooled version in lieu of water cooled" skid Mounting type thereby no foundation is required and the system is ready for use.

You need to provide the power supply at the site. For the above systems , kindly refer our Air Dryer & Auxiliaries for obtaining 100% Moisture free air

Capacities Ranging from : 158.0 -1610.0 CFM

Working Pressure : 4 -15 Kgs/Cm^2(g) Complete system shall be offered "Air Cooled version in lieu of water cooled" skid Mounting type thereby no foundation is required and the system is ready for use. You need to provide the power supply at the site.

These systems shall be offered in canopy as a silenced version.

For the above systems , kindly refer our Air Dryer & Auxiliaries for obtaining 100% Moisture free air.

A full range of both horizontal and vertical air receives upto 5000 ltrs at a maximum working pressure of 30Kgf/cm2.

These receivers are manufactured according to IS:2825/ASME Sec VIII Div I/EN 286 standards

water cooled after coolers consist of a shell and tube heat exchanges in which compressed air in tubes is cooled by water to a temperature of 5 to 8°C above the temperature of water in the shell.

Capacities up to 3000cfm at a maximum pressure of 70 kgf/cm2 can be offered. Integral moisture separators con also be supplied as optional accessory.

Shell and tube type heat exchangers for cooling oil and other hydraulic media, Used in gensents, captive power plants, presses, and machine toolset. These are made with high quality material and workmanship to last long.

Custom built heat exchangers can also be manufactured

Summits has a wide range of compressed air filters from 10cfm to 3000 cfm at a maximum working pressure of 70kgf/cm2.

The available standard ranges are moisture separators, oil removing filters, micro filters

(coalescing filters up to 0.01mg/m3) & particulate filters (up to 0.1mm). The outlet air quality from these filters is according to ISO8573-1, Table 2&4

Specifications:

* Handling Capacity: 1 to 15000 cfm
* Working Pressure: 1 to 400 bar
* Particle removal 5 to 0.01µm
* Maximum oil carryover 5 to 0.01 mg/m3
Salient Features
* High quality filtering media
* Powder coated aluminium / carbon steel housing
* Corrosion resistant coating inside carbon steel housing
* Differential pressure indicator (Optional)
* Outlet air quality according to ISO 8573 - 1, Table 2 & 4

FEATURES :

* CE tested compliance 
* Fully automatic - no maintenance 
* One model for all applications 
* Voltage 115V or 240V AC 50/60Hz 
* Simple to install 
* IP65 enclosure 
* Adjustable interval and discharge times 
* Test switch - for routine inspection and depressurisation

* Solid-state timer for long life and reliability 
* LED indicating power ON or OFF 
* Rugged ABS fire resistant housing S
* mall compact design 
* FPM seals 
* Large orifice valve

FEATURES :

* CE tested 
* Fully automatic - no maintenance 
* One model for all applications 
* Multi voltage 24-240V AC/DC, 50/60Hz 
* Simple to install 
* IP65 enclosure 
* Adjustable interval and discharge times 
* Test switch - for routine inspection and depressurisation

It's Smart...

* No air loss 
* One model for all capacities 
* Microprocessor 
* Special Transducer Interface 
* Automatic re-set 
* No Sensors to foul up 
* State-of-the-Art Software

It Guards...

* 50 Measuring checks per second
* Standard alarm feature 
* Not affected by siphon effect 
* Large orifice for fast discharge 
* IP65 enclosure 
* FPM valve seals 
* Contact free alarm option

Microprocessor controlled (7 day program feature - multiple cycles possible each day - ) 
External push button controls (disassembly not necessary) Simple to install Easy to program

1" NPT pipe size
LCD displaying the program cycle and the current time 
230 psi and FPM seals 
Voltage 115VAC 50/60Hz 
Orifice 1" 
Ball rotation 90 degrees in 70 seconds (this to avoid water-hammer when Opening or Closing) Stainless steel ball, valve is nickel plated brass

Applications:Low noise helical geared AC Motors from 1W to 120W.Gear reduction ratios from 3:1 to 2000: 1. Maximum torque up to 300Kgcm.Single/three phase motors with brakes, tachos and suitable speed controllers.

NORD-Single Phase and Three Phase MotorsWith and without brake and with 4 poles as energy-saving three- phase motors.

As NORD produces its own motors with no sub- suppliers involved, no bottlenecks occur, and our customers can rely on short delivery times. If NORD energy-saving three- phase motors are used which have a substantially higher degree of efficiency,operating cost can be reduced by as much as 40 %.

NORD energy-saving three-phase motors are also available conforming to US Energy Policy Act (EPACT) stipulations of 1992

Landsky offers high performance PMDC motors are designed and built for continuous operation even in hot, humid and dusty environment. Available in geared as well as ungeared versions.

Special features: Oversized brushes for longer life, Robust design with fan cooling. Frame sizes compatible with dimensions of hollow-input gear-boxes. Wash down duty where required.

Used in applications like Printing, Packaging, Pharmaceutical, Plastics, Textile, Food processing machinery, Conveyors, Elevators, Blowers as main drives or control motors.

Landsky offers PMDC, Series Wound and Separately Excited D.C. Motors specially constructed for Electric Vehicles.

Special features: Compact, High current capacity and intermittently severe over-load capacity. Brazed winding terminations for stable operation at elevated commutator temperatures.

Applications:Built for continuous operation even in hot, humid and dusty environment. Available in geared as well as ungeared versions. Oversized brushes for longer life, robust design with fan cooling.

Landsky offers a choice of Helical, Worm, Planetary, and Spur Gear-boxes with gears directly mounted on motor shaft.Wide range of gear-ratios are available.

Special features: Compact and light-weight Aluminum die-cast housings. Profile ground gears for high efficiency and low noise operation.

Used in applications like Printing, Packaging, Pharmaceutical, Plastics, Textile, Food processing machinery, Conveyors, Elevators, Electric Vehicles etc

1 H.P, 1.5 H.P, 2 H.P & 2.5 H.P -3000/4000 RPM ratings. High torque, Low noise, Capacity to handle surge currents, High insulation resistance for safety, Compact & light-weight. Can be supplied with dynamically balanced flywheel/pulley.

Landsky offers a range of Laminated Yoke D.C. Motors with Series, Shunt and Compound Windings.

Special features: Sparkless commutation, Faster response time, Suitable for use with SCR drives, Class F/H insulation, Compact profile, Vacuum impregnated coils for durability, and Resiglass banding for stability of rotor coils at high rotational speeds.

Used in Printing, Textile, Packaging ,Plastic, wire drawing machinery, Elevators, Conveyors

Best for applications that require stable speed. Control, precise positioning, quick response and accurate torque control. Very compact, rugged and reliable. From 0.016N.m rated torque to 43N.m rated torque.

Rated speeds from 1000 to 3000 rpm. Peak speeds from 2000 to 5000 rpm. Low, Medium and High Inertia models. IP 65 class.

With 2500 ppr incremental encoder or 17 bit absolute encoders.

With brake, shaft seals and planetary gear heads as options.

CE and UL rated.

1.8 deg, 200 steps per revolution 2 phase steppers. Highest Torque per frame size in the Industry. Available in NEMA 23, 34 & 42 frame sizes. From 0.4N.m to 40N.m holding torque with speeds up to 3000 rpm. Available with shaft seals, encoders and planetary gear heads as options.

A wide range of incremental and absolute optical shaft angle encoders.

EMI shielding, ABEC class 7
bearings and 1 or 2-channel quadrature outputs are standard features.

A wide variety of user options like light and heavy duty models; output terminations; supply voltages; complementary and index outputs; dual resolutions; U, V and W tracks for commutation of brush less servomotors; sine wave & pulsed outputs are available. Up to 3600 ppr available on code disc.

10V/1000 RPM, 20V/1000 RPM, 50V/1000 RPM. Low ripple content, less than 0.1% linearity error and reversing error. Use of silver graphite brushes results in low ripple output.

World smallest AC geared motor, with the longest service life. Widest variation ever found from 1W up to 120W, with the input voltage of 220V (or 200/240V) as standard design. CE certified, with speed control and braking devices fully equipped.

Application: Conveyors and material handling, FA system, loader and unloader. Food processing and packaging.

Printing and film processing. Fans, pumps and blower. any general machinery with AC supply.

Based on the proven UNICASE concept Getriebebau NORD has developed the compact geared motor NORDBLOC.

Six sizes in double and triple reduction designs, as foot or flange mounted gearboxes or geared motors cover the power

range 0,12 - 45 kW and the output torque range 86 - 3000 Nm. * Power range 0,12 - 45 kW * Torque range 86 - 4000 Nm

Performance specifications

11 basic sizes, available as double- and triple-reduction and combined drives.Power range from 0,12 kW ( 0.16 HP ) to 200,00 kW ( 250.00 HP ).Speed range from 0,2 rpm to 345 rpmOutput torque range from 271 Nm ( 2,400 LB.IN. ) to 60.000 Nm ( 531,000 LB.IN. )Ratio range from 4,1 : 1 to 6.618 : 1

Performance specifications12 variator sizes availablePower range from 0,25 kW ( 0.33 HP ) to 110,00 kW ( 150.00 HP ).

Speed variation ranges up to 8,5 : 1

Performance specifications11 basic sizes, available as single-, double- and triple-reduction and combined drives.

Power range from 0,12 kW ( 0.16 HP ) to 160,00 kW ( 200.00 HP ).Speed range from 0,1 rpm to 1.200 rpmOutput

torque range from 58 Nm ( 513 LB.IN. ) to 20.000 Nm ( 177,000 LB.IN. )Ratio range from 1,3 : 1 to 14.340 : 1

Performance specifications9 basic sizes, available as triple- and quadruple-reduction and combined drives.

Power range from 0,12 kW ( 0.16 HP ) to 160,00 kW ( 200.00 HP ).Speed range from 0,3 rpm to 185 rpmOutput torque

range from 350 Nm ( 3.100 LB.IN. ) to 26.000 Nm ( 230,100 LB.IN. )Ratio range from 8,0 : 1 to 4.916 : 1

Performance specifications

6 basic sizes, available as double- and triple-reduction and combined drives.Power range from 0,12 kW ( 0.16 HP ) to 15,00 kW ( 20.00 HP ).Speed range from 0,2 rpm to 318 rpmOutput torque range from 172 Nm ( 1.520 LB.IN. ) to 3.050 Nm ( 27.000 LB.IN. )Ratio range from 4,4 : 1 to 7.095 : 1