A full range of both horizontal and vertical air receives upto 5000 ltrs at a maximum working pressure of 30Kgf/cm2.

These receivers are manufactured according to IS:2825/ASME Sec VIII Div I/EN 286 standards

water cooled after coolers consist of a shell and tube heat exchanges in which compressed air in tubes is cooled by water to a temperature of 5 to 8°C above the temperature of water in the shell.

Capacities up to 3000cfm at a maximum pressure of 70 kgf/cm2 can be offered. Integral moisture separators con also be supplied as optional accessory.

Shell and tube type heat exchangers for cooling oil and other hydraulic media, Used in gensents, captive power plants, presses, and machine toolset. These are made with high quality material and workmanship to last long.

Custom built heat exchangers can also be manufactured

Summits has a wide range of compressed air filters from 10cfm to 3000 cfm at a maximum working pressure of 70kgf/cm2.

The available standard ranges are moisture separators, oil removing filters, micro filters

(coalescing filters up to 0.01mg/m3) & particulate filters (up to 0.1mm). The outlet air quality from these filters is according to ISO8573-1, Table 2&4

Specifications:

* Handling Capacity: 1 to 15000 cfm
* Working Pressure: 1 to 400 bar
* Particle removal 5 to 0.01µm
* Maximum oil carryover 5 to 0.01 mg/m3
Salient Features
* High quality filtering media
* Powder coated aluminium / carbon steel housing
* Corrosion resistant coating inside carbon steel housing
* Differential pressure indicator (Optional)
* Outlet air quality according to ISO 8573 - 1, Table 2 & 4

FEATURES :

* CE tested compliance 
* Fully automatic - no maintenance 
* One model for all applications 
* Voltage 115V or 240V AC 50/60Hz 
* Simple to install 
* IP65 enclosure 
* Adjustable interval and discharge times 
* Test switch - for routine inspection and depressurisation

* Solid-state timer for long life and reliability 
* LED indicating power ON or OFF 
* Rugged ABS fire resistant housing S
* mall compact design 
* FPM seals 
* Large orifice valve

FEATURES :

* CE tested 
* Fully automatic - no maintenance 
* One model for all applications 
* Multi voltage 24-240V AC/DC, 50/60Hz 
* Simple to install 
* IP65 enclosure 
* Adjustable interval and discharge times 
* Test switch - for routine inspection and depressurisation

It's Smart...

* No air loss 
* One model for all capacities 
* Microprocessor 
* Special Transducer Interface 
* Automatic re-set 
* No Sensors to foul up 
* State-of-the-Art Software

It Guards...

* 50 Measuring checks per second
* Standard alarm feature 
* Not affected by siphon effect 
* Large orifice for fast discharge 
* IP65 enclosure 
* FPM valve seals 
* Contact free alarm option

Microprocessor controlled (7 day program feature - multiple cycles possible each day - ) 
External push button controls (disassembly not necessary) Simple to install Easy to program

1" NPT pipe size
LCD displaying the program cycle and the current time 
230 psi and FPM seals 
Voltage 115VAC 50/60Hz 
Orifice 1" 
Ball rotation 90 degrees in 70 seconds (this to avoid water-hammer when Opening or Closing) Stainless steel ball, valve is nickel plated brass