We have in store for our customers a wide range of Gas Cutters including various models of Gas Cutting Machines, Gas Welding Equipments, Die Cutting Machines, Portable Welding Machines etc. Sourced from well known companies, these cutters are manufactured in accordance to the industry norms and standards. These are offered in customized forms and can be purchased at highly unbelievable rates. Used in diverse industries, these cutters are durable and resistant to corrosion.

.

Single Stage Regulator
These general purpose single stage regulators are recommencded for inert and non-corrosive gas applications where precise control of delivery pressure is not necessary.They are well suited. 

.

Single stage regulators with flow meter are recommended for inert gas aplications where precise control of flow by neelde valve. 

.

• All joints are silver brazed.
• Each Cylinder block having mechanical detachable connection and coupler joint by teflon ring.
• All parts are ultrasonically cleaned and purged with nitrogen gas.
• Can be extended or reduced by number of cylinders as an whe required at customer's end
• No maintenance parts require except for valves.
• Pigtail with detachable nut/nipple. No need to braze or debraze.
• All hex brass fitting made from high tensile rod to increase life of parts.
• Isolating valve/Bank control valve is bis marked. Soft seal type, wheel operated no need cylinder key can be safe in case of emergency.
• Hydrulic test at 300 bar with water media and pneumatic test at 140/150 bar with nitrogen cylinder.
• Test certificate will be given with supply.Test can be done in presence of customer at our end if required.

.

HIFLOW® Liquid flux is a specially formulated flux for brazing applications using a DISPENSER ( Fig:1), flux introduced into oxy-acetylene or liquefied petroleum gas-lines supplying flame through the brazing torch. 

HIFLOW® liquid flux is used almost exclusively in Torch Brazing. The fuel gas is passed through a Dispenser containing liquid flux. Liquid Flux is mixed in the fuel gas and comes out with the torch flame. The flux is applied by the flame where needed on base metals such as carbon steels, low alloy steels, cast iron, copper and copper alloys, nickel and nickel alloys, and precious metals. 

.