• 800V DC Bus
• 1700V IGBTs
• 3kHz switching frequency
• Air cooled
• Rated for 50°C Ambient
• Fiber optic interface driver
• DC voltage sensor provided

.

• 800V DC Bus
• 1100A current rating, 3 phase
• 1200V IGBTs
• 4kHz switching frequency
• Air cooled
• Rated for 50°C Ambient
• Electrical interface driver
• Based on Infineon Primestack

.

• 600V DC Bus
• 180A current rating, 3 phase
• 1200V IGBTs
• 15kHz switching frequency
• Air cooled
• Rated for 50°C Ambient
• Electrical interface driver

.

• SCR stacks upto 6000A
• Forced-air and water-cooled designs
• Complete solutions with fuses
• Customised solutions

.

• 25 kHz, hard switching
• 600 V DC bus.
• 482 Amperes RMS, 3 phase
• Customized heat sinks
• Film capacitors for DC link
• IGBTs with SIC free-wheeler diodes

.

• 15Kv, 28A
• 11Kv, 35A
• 40Kv, 5A
• Modular Power Supplies
• Based on ZVS (Zero Voltage Switched) IGBT technology
• Amorphous core Transformers
• Isolation level to 100kVdc
• Very fast rise times
• Very low ripple (0.2%)
• Very fast data Acquisition (within 5uS)

.

• Three phase Diode Bridge Stack upto 1200VDC, 1000A
• Used extensively as front end rectifier in 1.5MW, WEC's
• Field proven with large installation base, successfully running
• Air and water cooled versions available

.

• Three phase stack for 300kW
• Each half-bridge made of two chopper modules
• New generation of Infineon IGBT Tjmax 175ºC
• Boost chopper and brake for LVRT integrated, along with Diode module
• Force Air cooled
• Carrier frequency of 10kHz Max
• State-of-the-art Drivers with Active Clamping
• Driver customised to match customer controller
• Analog signal conditioning as per customer requirements
• Individual phase-legs replaceable easily

.

• 300A current rating, single phase
• 600V IGBTs
• 15kHz switching frequency
• Water cooled
• Rated for 50°C Ambient
• Fiber optic interface driver

.

• Single board system with comprehensive IOs
• Texas Instruments C2000 Series TMS320F24XX and TMS320F28XXX
• High Performance DSP Controllers
• Up to 18 Programmable PWM Channels with selectable dead times
• 16 Channel 12 Bits Bipolar ADCs
• 16 Nos of Isolated Digital I/Os
• Provision of CAN, UART, SPI and I2C Interfaces
• Standard J-Tag Interface and compatible with CCS 2.2 or later
• High performance, industrial proven boards ideal for all power electronics applications

.