Features:

• Incorporated with Advanced Microcontroller.
• Alphanumeric display and user friendly feather touch keypad.
• Equipped with inbuilt validation facility.
• Non-volatile memory for storage of 24 test methods’ data.
• Informative help prompt messages displayed, to guide user while conducting test.
• Updated test status displayed.
• Calculates Bulk Density, Tapped Density, Compressibility Index and Hausner Ratio
• Simultaneous action of rotating and tapping of the cylinders.
• Supports USP – I and USP – II.  ASTM method (Available Optionally)
• Print format as per GLP requirements.

.

Features:

• Combined Titrator for Potentiometric & Karl Fischer titrations pH titrations
•  Titration Modes: Potentiometric, Karl Fischer and pH
• Measuring pH range 0 -14 pH.
• Supports both Water and DST method for Factor determination.
• Results in Percentage, PPM and mg of H2O.
• Wide Range of Moisture Detection; 50 PPM to 100%.
• Instrument suitable for Potentiometric titrations.
• Suitable for TAN /TBN titrations as per various ASTM  Methods.
• Incorporated with maintenance free metering pump.
• Valve less Dispenser suitable to handle various titrants.
• Titrant can be changed within no time.
• Cumbersome Piston Burette is eliminated for ease of operation.
• Several titrations can be carried out without the need of refilling the titrant
• Eliminates the need of separate dispenser for different titrants.

.

Features:

• Microcontroller Based Titrator suitable for accurate estimation of moisture.
• Incorporated with maintenance free metering pump.
• Valve-less Dispenser eliminates the need of cumbersome piston burette.
• No Refilling is necessary after every titration.
• Several titrations can be carried out uninterruptedly.
• Supports both Water and DST method for factor determination.
• Automatic Calculations of Factor and Results.
• Results in Percentage, PPM and mg of H2O.
• Drift Control: Automatic Drift Compensation.
• Password protection facility provided.
• Equipped with inbuilt volume validation facility.
• RS 232 serial port for balance and PC  interface.

.

Features:

• Automatic Leak Test Apparatus can be used for quality control purposes to find leaks, holes or other such deficiencies in packaging of tablet blisters packs and strips, bottles, vacuum sealing bags and confectionary products.
• 20 x 4 Wide angle alphanumeric display panel.
• Equipped with Hold Time cycle ranging from 15 to 600 seconds along with Retention Time cycle which can be set for minimum of 1 second and maximum of 300 seconds.
• The test can be formed for a set vacuum of minimum 150 mmHg and maximum 600 mmHg.
• Apparatus can be connected to a desiccator with varied sizes ranging from 6, 10, 12 inches.

.

Features:

• VDIGITAB is a Digital Tablet Hardness Tester.
• It measures the force required to break a tablet by a diametric compression test.
• It is a horizontal loading mechanical strength testing machine. 
• Equipped with microcontroller based circuitry, specially designed to measure Hardness, Diameter and Thickness of the tablets.
• Measuring units for Thickness and Diameter: mm (Millimeter) or IN (Inches) hardness selectable in either Newton (N), kilopond (kp) or Strong Cobb (Sc).
• Provides connectivity to any balance via RS 232 interface to weigh the tablets before and after conducting the test
• Password protection for secured data storage.

.

Features:

• Advanced microprocessor-based circuitry.
• Programmable Modes: Timer or Rotation.
• Designed with a 10⁰ tilt feature, used when the shape or size causes irregular tumbling.
• Magnetic Trays supplied along with the instruments to collect the tablets.
• The two acrylic drums having a slot positioned so as to automatically discharge the tablets into the trays, at the end of the test without dismantling the drum assembly.
• Total number of drum revolutions can be set in the range of 1 to 9999.
• Provides connectivity to any balance via RS 232 interface to weigh the tablets before and after conducting the test. (with the use of appropriate cable)
• Compliant with IP, BP and USP standards.
• IQ, OQ documents will be provided with the instrument.

.

Features:

• Microcontroller based circuitry to precisely control, indicate and program temperature of water bath and beaker individually.
•  PAUSE' facility: This facility permits chemist to check disintegration state of the tablets intermittently and continue test without disturbing the test parameter
•  Equipped with individual stepper motors to drive baskets up/down independently as well as for to conduct four test simultaneously
•  While one basket is in operation the other basket can be deactivated.
•  Basket’s motor movements can be validated independently and each basket can be
• programmed independently.
•  All parameters like- Set Test Time, Actual Test Time, Temperature, Heater's `ON/OFF' state etc, are indicated on graphic LCD display screen.
•  Protection for over temperature for Heater through software and hardware.
•  Facility to measure stroke length while test is on.
•  Beaker temperature of all three baskets displayed individually.

.

ALIENT FEATURES:

• MICRO CONTROLLER based Auto Sampler Unit with Syringe Pump.
• User friendly programming with graphic display and local key board.
• Two modes of operation: Synchronous & Asynchronous.
• Synchronous Mode: Auto Sampler unit waits for the input/start signal from main Dissolution system.
• Asynchronous Mode: Standalone sampler unit can be operated independently/manually by the user.
• High precision GLASS SYRINGE (10ml) with motorized valve capable of handling any type of samples.
• Glass syringe available for both 6 Station & 12 Station Units.
• Performs all type of operations, like:
• Rinsing (user settable volumes 1 to 3 ml volume)
• Sampling (user settable volumes 1 to 25 ml).
• Replenishment. Simple calibration / validation procedure.
• Clean cycle after every test.

.