Danly IEM uses ‘Clutch spring quality chrome silicon wire’, this limits the depth of surface defects, the starting point of cracks and is ‘vacuum degassed quality wire’, this decreases the incidence of inclusions and other impurities which can reduce spring life.

.

Cost Saving
In-die tapping saves money
Danly has multiple tool options to tap hole sizes up to M8 or 5/16”
Die designers can chose from many mounting options
Roll form taps provide long life and higher speeds
Rapid TAP software is free and helps customers design dies incorporating the IEM tapping tools

.

Vacuum impregnated graphite plugs offer longer wear life. Available in steel or bronze.
What products do we offer

Steel
Bronze
With Graphite
Without Graphite

.

Form decorative / pre-painted metals in your existing metal dies without die marks
Ideal for Press Brake Forming Applications & small drawn parts
Reduce / eliminate rework & eliminate scoring by using DCF in your metal forming jobs
Available in thicknesses 0.2 mm & 0.5 mm

.

Can bend straight profiles at any angle (max. 120° overbend)
Tolerance of 0.5 degrees and forming tonnage reduced by 40 ~ 80%
Bending with zero marks & extended life (100,000 cycle maintenance)
Can operate at high operating speeds & tool can be mounted easily on any press
Maximum sheet thickness upto 4.5 mm
Specialized solutions for multiple bends in one stroke

.

Consists of guide post & bushing
Speed limitations
Lower initial purchase cost

.

Specially formulated for metal forming, greater abrasion resistance & can work at higher pressures with added durability
FORMATHANE springs (95A) are available for light, medium and heavy duty service.
The I.D. of all FORMATHANE springs and strippers are molded slightly undersize to
provide for a “press fit” onto the punch body.
FORMATHANE strippers provide high blank-holding pressure on the downstroke and
stripping pressure on the upstroke thus ensuring less jamming of blanks.

.