S&C Invotek Bag Filter housings size upto 220 GPM which can be used as a basket strainer and a bag filter.Inlet & outlet can be provided to any side / angle with BSP /NPT couplings,flanges, unions,etc

.

Duplex Filter Design permits continous operation as flow can be directed to either housing while the other is serviced. One lever controls all valves,which seal bubble tight

.

.

Multi Bag / Basket Unit eight different sized housing in flow to 4500GPM.Carbon or SS304/316 housing hold upto 23 baskets / bags.

.

They are easy to move from place inshopfloor where batch filteration is required. Fitted with a filter system, pump, pipelineon a trolley with electric starter. Backwashing line also can be provided on this type of system.

.

Designed for filtering metal working coolants and fluids.Available with /without magnets.These magnets holds heavy metal chips to avoid damage to filter bags.

.

These filter housing offer low price, greater dirt holding capacity and higher flow rates. Less space occupancy, more flow,economical.

.

These stainless steel cartdge elements overcome the temperature and compatibility limitations of fabric or synthic fiber cartidges.They’re good to 500 F.and are cleanable and re-usable rated 5-800 microns at 95 % efficiency.

.

.

Pleated polypropylene,polyethersulfone PTFE,nylon membrane cartidges available down to 0.1 micron rating which can be sterlised or autoclaved and resuable.

.

These filter bags are for heavy dirt load application.With 3 times the surface area of similar of sized bags,it will increase the amount of contaminant held, and extend the time between change-out. Rated 1-110 microns at 95% effciency. Top By welding each bag seam together this exclusive S&C positive heat-sealing process eliminates all needle holes that allow impurities to escape. S&C indusrty standard,panted, Poluloc one piece molded top provide a more positive seal than sewn ring top bags,and features built-in handles for faster,easier installation and removal. Top S&C industry standard, patended, polyloc one-piece molded top provides a more positive seal than sewn ring top bags, and features built-in handles for faster, easier installation and removal.

.