Most favorable machine for grinding even the hardest material and obtaining continuous production.
High range of fineness is possible if the Dynamic classifier is attached.

Linners, Grinding media may be provided of different hard material like Alloy steel, Ceramic, Granule brick etc.
Suitable for wet as well as dry grinding and mixing.
Application: - Quartz, Feldspar, Paint, Ceramic etc...

JAW CRUSHER SINGLE TOGGLE

Two series of Jaw Crushers are available. Single toggle and Double toggle type.
Single toggle Jaw Crushers have bearings with grease lubrication have simple construction, easy to maintain and economical.
Single toggle Jaw Crusher give higher percentage of fines, hence usually used as Pre Crusher.
Double toggle Jaw Crushers has forced oil lubrication with the help of oil pump and nozzles.

A robustly constructed machine for crushing almost all types of free flowing materials

The most suitable and convenient range to pulverize the maerial between 100 mesh (150 micron) to 10mm.

Usually used without cyclone and dust collector for bigger output particle size. For fine material, a cyclone with dust collector is used.

Impact Pulverizer are used for a wide range of application e.g. Agricultural Chemicals, Carbon & Graphite, Coal, Coke, Coconut Shell & Wood Saw Dust, Clay, Dye Stuff & Pigments, Detergents, Ferro Alloys Fertilizers, Fillers, Food Products, Herbs & Spices, Insecticides and Pesticides, Katha, Marine feeds, Minerals, Plastics, Pharmaceuticals, Resins, etc.

A heavy duty machine to pulverize Medium hard rocks, Minerals and Chemicals.
High fineness is possible from 100 mesh to 350 mesh (150 to 40 microns) and in some cases up to 500 mesh.
Since a Screen less classifier is used, the possibility of chocking or jamming is ruled out.
In built fan, cyclone and dust collector ensure dust free operation.

A specially designed Pulveriser with cyclone and dust collector suitable for spices and material like ayurvedic herbs etc.
Easily changeable screen is provided to get material of different fineness.
Specially shaped ‘M’ type hammers give high production under cool condition.
Pollution free working due to properly designed cyclone.
No RCC foundation is required if fixed on a specially designed AVM pad frame.

Most suitable machine for getting granules out of the brittle and hard material with very low fines generation.
Very hard rolls of alloy steel to crush even the hardest material.
Tooth types of Roll Crushers are also available with the same roll sizes.
Separate drive for each roll is given so that rolls break the particles with minimum friction.
No RCC foundation is required if fixed on a specially designed AVM pad frame.
Application: Emery, Glass, Quartz, Ceramic in granule etc.

Very much suitable to break the lumps into small pieces and when the material is brittle or soft.
A versatile and economical machine when size reduction ratio is high but the required production is low.
Most suitable range for the lumps which are to be broken is between 5 to 30mm.
Different material of construction is available like high manganese steel, stainless steel etc., to suit the material physical properties.