PSPL designs “Custom – built” cylinders for various application in fluid power such as pushing and pulling, fine feed or high speed, static and dynamic load, slow or fast reciprocation, short or long strokes or combination of these and other requirements.

Range:

• Working pressure 10 bar to 550 bar
• Bore diameters 40mm to 800 mm
• Stroke Single Stage Cylinder 5000 mm
• Multistage Cylinder 15000 mm

.

Electronic Control Activities

• PLC Control Panels – Siemens, Allen Bradley, Mitsubishi and Messung Make.
• Close Loop Servo Control systems for – Position Control, Speed Control, Acceleration Control, Force/Pressure Control.
• Ergonomically designed HMI.
• Relay logic Control Panels.
• MCC Panels
• SCADA

.

HIGH PERFORMANCE INTEGRATED MANIFOLD ASSEMBLIES 

Compact, state of art integrated manifold assemblies, which enable minimum piping for large flow capacity systems. Designed with smooth shifting, quick response, DIN standard slip – in cartridges. These manifolds result in shock free switching with reduced dead cycle time, system shock and system leakage.

.

Size – NG 200 to NG 400
Working Pressure – 315 bar

.

Size – NG 50 to NG 125
Working Pressure – 315 bar

.

PSPL designs special valves as per customer requirements for various applications.

.

Electro-hydraulically operated machine. Meant for mass production of honed partslike Valve bodies, Master cylinders etc. Manual Loading / Unloading 6 stations, of which,

• 1 station for loading and unloading of component
• 4 station for progressive honing of bore to final size
• 1 station for brush finishing for de-burring and rounding off sharp edges produced by the honing operation.

Length of honing approach stroke and speed & length of honing stroke of each station can be independently adjusted. Rotary speed of each honing station can be independently adjusted Floating honing tool holders, Guiding and flushing bush for smooth entry of tool and flushing.

.

This product is specifically designed to fulfill the need of a small Scrap Baling Machine of medium size machine shops, where about 2 to 3 tonne of turnings are generated daily.

The machine is simple to operate, easy to maintain and an unskilled person can be trained to operate it in about 1 hour time.

The machine helps the shop to :

• Reduce space required for store scrap/turning
• Maximizes value of the scrap sold
• Improve cleanliness in the shop
• Reduce losses generated while handling scraps
• Reduce losses while melting.

.

• The press is Designed & Manufactured with a motive to take care of scrap in machine shops.
• By converting the scrap into briquettes, the area looks clean. Environment friendly.
• Gives good financial returns as the value of the scrap (Briquette) increases due lesser melting losses.
• With briquettes, the Scrap handling/ transportation is eased.
• Small chips can be pressed & briquettes can be formed. Scrap material can be steel, copper, brass, wood.
• Press functions automatically. (Unmanned).

.

.

.