Centrifuge is designed according to the principles of a horizontal centrifuge and includes the combination washing and a subsequent drying of shredded plastic material. The residual humidity of the material before further processing in the Densifier or the extruder is an essential element of the energy consumption of the regeneration plant. The Centrifuge has proved to be the machine best suited to dry the material, which exits the tank with a humidity of up to 40-50%, to a residual humidity of 4 -5 % for LDPE or PP Film and 1 -2 % for rigid material such as HDPE or PP. The mechanical drying is superior to the thermal drying concerning energy consumption.

.

Panchal provides an ideal choice of granulators for recycling plastic waste from Film, Tape, blow molding & Injection moulded waste. Grinder can be supplied with Wet & Dry both model Wet Grinder give better cutting, less fines generation and long life blade interval.

.

The Turbo-wash replaces the pre-washing tank of the first-generation washing plants. The machine is designed according to the principles of a Vertical centrifuge and includes a combination of washing and a subsequent initial drying action. It is therefore possible to process very dirty pre-shredded material with high paper content and Aluminum foil residues. The Turbo-wash also improves the recovery rate of the Sink Float Tank.

.

Centrifugal Dryer (Vertical type) is an Centrifuge which remove surface water from Soft to Rigid material Input Moisture 25% Output Moisture 2-3% Rigid material like HDPE/PS/ABS/PET Flakes Soft material like LDPE/HDPE/PP Film.

.