Microminus rectifiers are designed for 415 volt,3-Phase,50Hz,a.c.input Supply With D.C.out put Variable With Dimmerstate from 0 to maximum rating of o/p voltage/Current. The three Phase oil Cooled rectifiers are preferred for more Then 250 ampere capacity. The unit Will be Provided With double wound Transformer, Dimmerstate, Diode assembly, shunt, Analog/Digital Meters of the standard grade.

The unit will be fully immersed in to oil tank filled with transformer oil. Castor wheel is provided to move the entire unit easily.

.

The latest developed single/three phase rectifiers are designed to provide better quality of electroplating as saved electrical Power to the great extent.
 

The unit is totally indigenously developed with our highly qualified team & well advanced instrumentation facility. The out put voltage can be available up to 100 volt as well as out put current can be available up to 15,000 ampere capacity.

Advantages

• Wide Operating Range
• Better Quality, Dense Deposition- Pulse Output
• Saving Of Electrical Power-higher Effecincy
• Light In Weight, small In Size, transportable
• Output Short circuit Protected
• Constant Current / Volltage Facility
• Led Display For Volt, Ampere, Timer/ampere Hour
• High Power Factor-low Reactive Power
• Designed For Continuous Operation
• Greately Reliable Products.
• Indiginously Developed-fully Waranteed Product

.

Hullcell Rectifiers :
CVCC Rectifier are available in the range up to 100ampere. Constant current or voltage can be set with the knob on the front. Ripple factor less than 1% will provide accurate control of current. Digital volt/ampere meters, digital timers will be provided on the front.

Most Preferable for GOLD, SILVER PLATING, RHODIUM PLATING. NICKLE PLATING, can be used for HULLCELL TEST.

Standard Available Ranges :

• 5 Ampere – 8 Volt
• 10 Ampere –8 Volt
• 25 Ampere –8 Volt
• 50 Ampere –8 Volt
• 100 Ampere –8 Volt

.

Single phase rectifiers are available up to 250 Ampere capacity in the various voltage ranges. Dimmerstate on the front used to set the o/p voltage. The Unit Will Comprises of Digital Voltmeters, ammeters, Timers, Ampere hour meter. Above 250 Ampere 3 Phase Rectifiers are Preferable.
Standard Ranges Available :

( With Timer/Without Timer ) :

25 Ampere – 8 Volt / 12 Volt / 16 Volt / 24 Volt
50 Ampere – 8 Volt / 12 Volt / 16 Volt / 24Volt
100 Ampere – 8 Volt / 12 Volt / 16 Volt / 24 Volt
50 Ampere – 8 Volt / 12 Volt / 16 Volt / 24 Volt

.

• Two different dels amovailable :
• Manually operated Rectifier :
• On pressing the reset button of timer, voltage will display on the volt meter. After the set time, o/p voltage will cut off. The voltage can be set by the Dimmerstate on the front panel.
• Ramping Rectifier :
• On pressing the reset button of timer, the voltage will start increasing & will reach to the set value (Set on the constant voltage controller). After the set time is over, o/p voltage will zero. Again by pressing the reset button, next cycle will be repeated.
• Standard Ranges Available :
• 20 Ampere: 80 volt / 100 volt / 120 volt / 150 volt
• 50 Ampere: 80 volt / 100 volt / 120 volt / 150 volt

.

For the Selective Electroplating of Delicate Areas like Rhodium, Gold and Silver.

Rectifier :

Voltage-Stabilized and double insulated for 240v/ ~50 / 60Hz

Max output current :

20 volt, 1.5 A

• Equipment :
• 1 electrode pen (anode) with mixed oxide activated contact, connection cable with plug and 1 cable with plug and Workpiece clip (cathode), 10 fiber tips

.