Densified Wood Laminates are made from thin veneers impregnated with synthetic resin adhesives and pressed at high temperature and pressure. It is widely used for specific heavy duty applications in various industries. It is a revolutionary product for applications in the transformer industry. It is a homogenous material manufactured from specified species of timber. It has exceptional mechanical properties coupled with oil absorption characteristics. After vacuum drying and impregnation with Pyrochlor or transformer oil, it acquires dielectric properties of transformer oil with enhanced mechanical properties.

Types & Grades:

It is an industrial laminate with extensive engineering applications & available in two types:

• Type 1: This represents laminates where all laminations have grains in the same direction.
• Type 2: This represents adjacent laminations with grain direction at right angles to each other. Each type is manufactured in three different density ranges denoted with the nomenclature LD (Low Density), MD (Medium Density) & HD (High Density).

Features:

• Lamtex Insulation can provide the material in thickness of 3/8" (9.5mm) to 4" (120mm) in two grades.
• The material can also be supplied in the form of components as per customer’s drawing or sample.

 

Densified Wood or Compreg Wood Laminates are made from thin veneers impregnated with synthetic resin adhesives and pressed at high temperature and pressure. It is widely used for specific heavy duty applications in various industries. It is a revolutionary product for applications in the transformer industry. It is a homogenous material manufactured from specified species of timber. It has exceptional mechanical properties coupled with oil absorption characteristics. After vacuum drying and impregnation with Pyrochlor or transformer oil, it acquires dielectric properties of transformer oil with enhanced mechanical properties.
 

Compreg Wood is characterized by the following properties:

• Good electrical insulation.
• Very good oil absorption.
• Low specific weight.
• Withstands high mechanical loading.
• Low- and high-temperature resistance.
• Resistance to abrasion and wear.

 

Features:

• Lamtex Insulation can provide the material in thickness of 3/8" (9.5mm) to 4" (120mm) in two grades.
• The material can also be supplied in the form of components as per customer’s drawing or sample.

Applications:

This material is an industrial laminate, which finds extensive engineering applications in the manufacture of certain insulating components for the transformer industry.

Type 1 material is recommended for use where high tensile and bending properties are required besides insulation characteristics. It is used in the manufacture of cleats, buttons, rods, packing etc. where components undergo stresses of high tensile and high bending loads.
Type 2 material is recommended where high compression and high shear strength values are required, besides insulation characteristics.

Densified Wood is characterized by the following properties:

• Good electrical insulation.
• Very good oil absorption.
• Low specific weight.
• Withstands high mechanical loading.
• Low- and high-temperature resistance.
• Resistance to abrasion and wear.

 

Types & Grades:

It is an industrial laminate with extensive engineering applications & available in two types:

• Type 1: This represents laminates where all laminations have grains in the same direction.
• Type 2: This represents adjacent laminations with grain direction at right angles to each other. Each type is manufactured in three different density ranges denoted with the nomenclature LD (Low Density), MD (Medium Density) & HD (High Density).

Features:

• Lamtex Insulation can provide the material in thickness of 3/8" (9.5mm) to 4" (120mm) in two grades.
• The material can also be supplied in the form of components as per customer’s drawing or sample.