MS4425

• PC Board Mountable Pressure Sensor
• 0-100 mV Output
• Voltage Excitation
• Differential, Gage, and Absolute
• Temperature Compensated

The MS4425 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in- line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required.

Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors.

The pressure sensor is available in absolute, gage or differential pressure ranges from 0-1 to 0-300 psi. The pressure ports are 1/8” barbed ports which mate with 3/32” ID tubing. These tubes are parallel to the printed circuit board to allow other boards to be located above the sensor. For a vertical mounted tube in gage or absolute pressure, refer to the MS4426

.

M5100 Heavy Industrial Pressure Transducer

• CE Compliance
• Wide Temperature Range
• Compact

Description

The M5100 series pressure transducers from the Microfused™ line of MEAS, set a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.

Features

• Heavy Industrial CE Approval
• 100 V/m EMI Protection
• Reverse Polarity Protection
• Extended Temperature Range
• 1% Total Error Band
• Compact Outline
• -40°C to +125°C Operating Temperature Range

Applications

• Advanced HVAC Systems
• Refrigeration Systems
• Automotive Test Stands
• Industrial Process Control
• Pumps and Compressors
• Hydraulic/Pneumatic Systems
• Agriculture Equipment
• Energy Generation and Management

.

P900 Series
Premium Performance Strain Gauge

Schaevitz® P900 Series Strain Gauge Pressure Transducers are premium grade sensors that provide highly precise measurement of absolute, vented gauge, or sealed gauge pressures over wide temperature ranges.

Standard versions of this transducer use a 17-4 pH stainless steel diaphragm to sense pressure (Inconel versions are available for operation in highly corrosive environments). The deflection of the diaphragm is transferred to a double cantilever beam by a force transfer rod. Strain in the beam, and therefore, input pressure is measured by four foil strain gauges.

Features

• High overload capability
• Operation in high temperatures
• Shock and vibration resistant
• 2-wire, 4-20 mA option: Intrinsic safety approval to E Exia IIC T4 (Tamb=60°C) BASEEFA, CENELEC EN50-020

Applications

• Hydraulic pressure monitoring
• Torpedo depth sensing
• Vehicle brake system monitoring
• Military and commercial aircraft

.

D5100 Industrial Differential Pressure Transducer

• 316L Stainless Steel Wetted Surface
• Voltage, Current, and mV Outputs
• True Wet/Wet Differential
• CE Certified (amp

.

Series 104
Low-Cost Differential Pressure Switch

• High Quality, Low-Cost
• Visual Set Point Indication
• Hassle-Free Field Adjustment Knob
• 2% Repeatability

The Series 104 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 2A @ 250V and can be set as low as 0.08” w.c. (20 Pa)

.

DPG
Features

• Simple 2 button operation
• Re-Zero feature & peak pressure reading
• Backlight turns on when on/off button is pressed and with pressure changes
• 316L welded diaphragm seal
• Rubber boot is standard
• 5 year warranty

.