Salient Features

• Open Head Box for Machine speed up to 350 meters/ minute.
• Slice width up to 3800 mm are regularly manufactured.
• Profile variation across the deckle in maximum ±3 GSM
• Cylindrical, Tapered and Rectangular Tapered with Polypick diffuser, Manifold are provided depending upon the quality and production EVENERRO capacity.
• Two numbers Properly designed Evener rolls for evening effect and better deflocculation.
• Machined and Ground Top and Bottom Lip for smooth flow of stock.

.

Salient Features

• High efficiency wire part with Plain Couch roll
• Drainage elements designed as per the Machine speed, Stock freeness and other properties.
• Auto or manual Wire guiding arrangement
• Cantilever arrangement on framing for quick wire change
• MS fabricated frame with 2 mm S.S. cladding

.

Salient Features

• Press Section is designed considering the quality of the Paper and Paper Board.
• High Efficiency presses with Blind drill coating on top and bottom roll with felting
• arrangement for high speed. Presses suitable up to 150 Kg / linear cm are available
• Heavy Duty Press up to the finished diameter of 1000 mm are in regular supply
• Heavy Duty framing with Hydraulic or pneumatic lading system

.

Salient Features

• MS fabricated M.G.Cylinder up to 16 feet (4.88 meter) diameter.
• Width up to 4.00 mtrs is in regular production.
• SS Coating on surface (Optional).
• Stress relieved for removing stresses developed during bending and fabrication.
• Surface is machined and ground to achieve Mirror finish on the surface -Finish Ra 8 micron.
• Scooping system is provided to remove condensate efficiently.
• Heavy duty framing is provided for vibration free operation.
• Single and double Touch roll is provided depending upon the process requirement.
• Spur Gear and pinion in Cast Iron/ MS Fabrication/ polypick, teeth are geometrically evenly cut on precise Hobbing Machine for noise free operation.
• MG Cylinder is designed to operate on working pressure up to 6.0 Kgs/cm2.
• Hydraulically tested to a pressure of 11.0 Kgs/cm2 and held for 24 hrs.

.

Salient Features

• M.S (B.Q. Plate) Fabricated drying Cylinders with high evaporation rate
• Available in 4 feet, 5 feet and 6 feet diameter
• Shell thickness various from 25 mm to 36 mm
• Operating Pressure up to 4.5 Kgs Cm² and specially designed for higher working pressure up to 6.0 Kgs Cm²
• Suitable heavy duty framing in Graded Cast Iron and Mild Steel fabrication for the maximum coverage of paper at dryer
• Rope feeding system is provided for Machine speed over 200 MPM
• Dryer surface ground finish to Ra micron balanced dynamically to grade of 6.3 (ISO 1940)

.

Salient Features

• Pope Reeler is designed on the principle of friction Winding
• Primary grab Arm is Pneumatically / Hydraulically loaded and tilted Hydraulically mechanically with manual operation.
• Secondary arm is loaded Pneumatically / Hydraulically
• Pope drum is MS Fabricated and designed to with stand required nip pressure and provided with Doctoring arrangement
• Framing is Heavy duty in Cast Iron construction

.

Vibration Screens are used for screening of all fibers containing impurities. These screens are used for screening of low as well as high consistency pulp. The screen removes large impurities such as film, plastics, wet strength specks, metal particles, wooden splinters etc.

Salient Features

• Heavy Duty Rewinder for trimming and rewinding of Paper Web in required Reel Size.
• Rewinding is done by friction on double drum rolls duly loaded with chrome coated Rider Roll
• Slitting arrangement is provided with pneumatically loaded trimming knives.
• MS fabricated with frame proper stiffeners with Cast Iron Slide rail.
• Rider Roll is pneumatically balanced.
• Pusher roll for dislodging the rewound roll on collecting table.
• Pneumatically operated braking arrangement.
• Trim Handling system is provided with Blower and Dual Ventury
• Maximum operating speed is up to 500 MPM and driven by DC/ AC variable speed drive. .

.

Salient Features

• Line shaft drives as well as sectional drive depending up on the Machine speed.
• Heavy duty Worm Gear Boxes / Bevel Helical gear boxes.
• Pneumatically operated Rubber tube clutches with shoe grips line Shaft drive.
• Cone Pulley for different sizes
• DC variable / AC Variable Frequency drive.
• Sectional drives with DC variable speed drive with digital synchronizing
• Hand operated Belt shifters. Motorized option is also available

.

Salient Features

• Totally in Stainless Steel Construction.
• Suitable for Machine speed of 120 MPM
• Least Profile Variation
• Very good formation and sheet pickup of 3 5 GSM to 120 GSM
• Zero fiber loss due to rubber cord sealing.
• Better dewatering with Air suction on the wire.
• Adjustable Couch roll off center.
• SS Suction knife for removal of water at couch nip.
• Pressurized feed with Custom designed Tapered Manifold and Evener roll for uniform distribution.

.

Salient Features

• Inclined size press designed for on line sizing on the paper/paper board.
• Rolls are lined with special rubber suitable for surface sizing.
• Size kitchen in SS construction.

This is a bar coater for clay coating on DUPLEX BOARD, min -6 gram to 8 gram coating
Metering Bar Coater : Qty: 1 No.
Applicator Roll : Ø165 -with suitable face length Drive: D.C. Motor, R.P.M. 0 to 102,2 HP and can drive the roll clockwise or anticlock
Metering Rod : Ø 10 mm up to 2500 mm face and above 2500mm face -rod 0 16 The metering rod made out of 5.5 mtrl, chrome plated, ground Surface finish, fixed with plastic holder, called rod bed (special design) shall have water circulation system for cleaning the rod in running condition. The plastic holder called rod bed is fixed in 5.5 Holder.
Drive : 2 HP, D.C Motor, R.P.M -0 to 32
Jack System : The complete unit is fixed on fabricated frame and two nos or jack is fitted at both the end for lowering and lifting of the whole unit. Both the jacks are connected by connecting red couplings and fitted with bearings, plummer blocks.
Paper Lead Rolls : Suitable nos of lead roll (6 nos) manufactured
Control Panel : Control panel for both A.C & D.C motors, panel with regulators. Indicators. It also indicates R.P.M. of rod. Applicator roll.

.

Description / Specification of Calander

We are involved in offering a wide range of Calander to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Calander. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

.