Strain Gauge manufactured by IPA are of foil type  and comes in two different impedances which are 120 Ohms and 350 Ohms.

These are used in the manufacture of loadcells and various strain measurement applications. We also manufacture nickel gauges for :

Span compensation

Temperature compensation

You can have all the accessories like adhesives, cleaning agents, elements for bonding of strain gauges etc. from us.

.

We offer strain guage based pressure transducers with and without integrated amplifier. We are also launching the digital pressure transducer- with a digital output. Our pressure transducers are very rugged and can be used for all media compatible with steel. With a stainless steel enclosure, these tough pressure transducers are available from 5 kg/cm² to 300 kg/cm².

.

IPA Accelerometer utilizes the spring-mass system for generating a force proportional to the amplitude of the input acceleration to the base of the system. Force is applied to the piezoelectric (PE) element made of leadzirconate –titan ate (PZT) material that produces a charge output proportional to the force. The PE material is self-generating and does not require an external power source.

.

A load cell is  a transducer that converts force or load into usable electrical signal. The primary mechanical element develops a strain as the load cells is loaded and this strain is transferred through the  strain guages that are bonded on to this mechanical element  The output electric signal is in Milli volts. There are normally four strain guages that are bonded in the Wheatstone bridge configuration. Strain Guage based load cells are passive transducer i.e. it does not generate its own signals and have to be excited with an external voltage commonly referred as the excitation voltage. The output of the load cell is proportional to the load and the excitation voltage.

We manufacture loadcells from under 1 kg to a 1000Tonnes.. Based on various applications, below you find a few of our standard loadcells. Our loadcells are made of Aluminium, EN-24 and 17-4pH steel. If you are looking for a loadcell which is not in the list below, do contact us and we would be more than happy to develop the same for you or provide you with an equivalent design. We can supply special loadcells in low volumes at competitive prices

.