Steel Cable Drag Chains

ELEKTROMAG Steel Cable Drag Chains enable the conveyance of flexible cables/hoses etc. to movable units with maximum reliability.

The Steel Drag Chains are so constructed that they cannot bend below a fixed minimum radius to suit the cable or hose.

ELEKTROMAG Steel Cable Drag Chains are not only used for cable leads but also for hoses conveying gaseous, liquid or pulverised media. Single twisted leads can be conducted close to one another.

ADVANTAGES

Avoidance of mechanical strain on the cables/hoses
No tensile stress or compression,
No frictional wear as there is no relative movement between the cable/ hoses and the cable drag chain.
No bending below an established radius.
No crushing, buckling or forming of loops, or torsion strain.

CHAIN TYPE   :    0650/0650.1,  0950, 1250, 1800, 2500, 3200

VARIATION OF STAYS

Frame stay – with detachable profile bar
Solid frame stay – with sliding rail
Unsplit hole stay – Split hole stay

ACCESSORIES FOR ELECTROMAG CABLE DRAG CHAINS

Trough

To guarantee optimum operation of the ELEKTROMAG. Cable Drag Chain, a clean flat surface should be provided. lf this is not possible then a Trough is required.

Steelband covering

ELEKTROMAG Cable Drag Chains with Steelbands are used where it is necessary to protect the cables/hoses from hot chips and dust etc.