Apex Mineral Water processing Plant Treated any source of Water into Mineral Water Such as Pure Water / Safe Drinking Water with Reverse Osmosis System followed by Pretreatment and also having Sophisticated Post treatment As per standards of Drinking Water indicated in WHO, FDA, ISI. Available in the Capacity range from 250 L.P.H. to 20,000 L.P.H.

.

For extremely effective solids waste such as sand clay ,star , gras removal at flow rates up to 5 gallons per minute per square foot (GPM/ft2) the Conventional Downflow media filter offers an economical solution. Media beds can be sand, sand/anthracite, garnet/anthracite or anthracite depending on the service application. Typical installations use vertical vessels with header lateral distributors or a strainer plate design. Horizontal units are also offered for larger flow rates for economy in cost and space. Most installations require the use of air scour for cleaning the media when applications have difficult solids to remove. This design is well suited for water treatment applications such as removal of turbidity, softening processes precipitates, oxidized iron and manganese, and following a clarifier. This filter can be constructed of alloy materials for use in mining and corrosive applications such as copper electrolyte in solvent extraction/electrowinning circuits.

.

Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities such as chlorine ,color, odour ,and oil using chemical absorption. Each particle/granule of carbon provides a large surface area/pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media.

.

Hardness results from the presence of divalent matalli ,cations, of which calcium and magnesium are more abundant in water. Water softening process are needed for removal of hardness. The hardness is derived from the solution of Co1, released by bacterial action in the soil.

.

Water Supply from borewells do contain Dissolved iron, which when comes in contact with air, gets oxidized and forms a brownish precipitate.

To remove iron various process such as aeration, chemical dosing followed by filtration is adopted. However the Manganese green sand filtering medium provides an exclusive for removal of excess iron.

.

Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove larger particles from drinking water In reverse osmosis, an applied pressure is used to overcome osmotic pressure, a colligative property. Reverse osmosis can reduce many types of molecules and ions from solutions, including bacteria, and is used in both industrial processes and the production of potable water

.

The average size of the openings between pieces of the filter media are represented in microns. For example, a 20-micron filter has larger openings than a 5-micron filter. Consequently, the 20-micron filter element will let larger particles pass through the filter than the 5-micron media would. Bacteria range in size from 0.2 to 2 microns in width or diameter and from 1 to 10 microns in length for the nonspherical specie, so a 1-micron filter will remove most bacteria and cysts. If you are on municipal water, the water has already been treated with chlorine, chloramines and/or fluoride to remove bacteria, so chances are you do not have a bacteria problem, unless there is a problem with the water pipes between the water reclamation plant and your home. Although many customer purchase the 1-micron absolute for the kitchen because it can remove some pharmaceutical drugs, too,

.

A special lamp generates the radiation that creates UV light by striking an electric arc through low-pressure mercury vapor. This lamp emits a broad spectrum of radiation with intense peaks at UV wavelengths of 253.7 nanometers (nm) which research has shown is the optimum UV wavelength range to destroy bacteria. For more information on how UV works click here. UV disinfection can remove the threat to health from waterborne Pathogens without the creation of disinfection by products that can be generated from drinking water chlorination. From the common bacteria, E-Coli through the Cryptosporidium Oocysts to Adenovirus, UV disinfection is capable of providing effective treatment to ensure inactivation of these pathogens and ensure drinking water is safe.

.

Ozone is a Triatomoc (Nascent0 Ozygen which is known to be 3000 times more powerful than chorine.Ozone generators Consists ot two electrodes separated by a ceramic dielectric materials. This system is so arranged to form a narrow discharge gap for the electric current being passed. When air is passed through this gap and applied at low current electrical the gas became partially ionized and a diffused bluish glow results. This glow is called corona, when air is passed through this gap, the oxygen is converted into ozone. Corona discharge are more dependable and less cumbersome when compared to the U-V ozone generators. They produce more ozone and can be used for larger applications.

.

jar inner washing machine is 2 to 3 Kg pressure Mineral water spraying through the nosil to clean the inner side of the jar . To Remove the scale formation , algae formation and other contamination . and Hot Mineral water Washing facilities also available.

.

• Soap Oil Washing
• Chlorine Washing
• Ordinary Water Washing

Three Stage washing by Vertical Rotating Ruf nylon brushes each side four number and bottom side cleaning one brushes. Cleaning Jar/Hour 400 to 500 .

.

This has two main different methods, namely Single-stage and two-stage process. Single-stage process is again broken down into 3-station and 4-station machines In the two-stage injection stretch blow molding (ISB) process, the plastic is first molded into a "preform" using the injection molding process. These preforms are produced with the necks of the bottles, including threads (the "finish") on one end. These preforms are packaged, and fed later (after cooling) into a reheat stretch blow molding machine. In the ISB process, the preforms are heated (typically using infrared heaters) above their glass transition temperature, then blown using high-pressure air into bottles using metal blow molds. The preform is always stretched with a core rod as part of the process.

.

The fabricated in our factory different size , shape and capacity to storage of final treated product water . after this stage the water ready to filling .

Capacity : 250 Lt to 5000 Lt.
Shape – Cylindrical , rectangular and square.

.

• Packing range : 50 ml. to 500 ml.
• Production Speed : 50/60 Pouch per minuet
• Film Width : 225/240/325 mm
• Film thickness up to : 100 microns
• Film material : co-extruded virgin films
• Power consumption : 1 KW/HOUR
• Power requirement : singal phase, 220 , 50 HZ

.

Demineralization of water by the ion-exchange process involves ion-exchange treatment in addition to cation-exchange treatment considered above. The anion-exchange process is the exchange of anions between water-dissolved electrolytes and a solid granular material immersed in the water and referred to as anion-exchange material .(anion exchanger).

.

Description / Specification of Isi Lab

We are involved in offering a wide range of Isi Lab to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Isi Lab. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

.

MATERIAL OF CONSTRUCTION

• Electro-galvanised (G.I) sheet metal with powder coat finish.
• CRCA sheet with powder coat finish
• Water proof plywood with lamination
• Stainless steel.
• MDF board with lamination

.

Horizontal Laminar Flow Cabinet direct the air through PRE filter at the bottom level of the cabinet and the air flows horizontally through HEPA filter towards the work area. Again the air is discharged back to the room. Thus horizontal laminar flow cabinet provides only product protection.

.

Double walled chamber with interior made of stainless steel and exterior made of Cold Rolled Mild Steel Sheets finished in powder coating. Insulation is by special grade glass wool. Removable steel Trays are provided.

Double door system, with inner Acrylic door and outer double walled M.S door provided with lock and key arrangement.

.

Double walled chamber with interior of stainless steel sheets and Exterior made of cold rolled mild steel sheet finished in powder coating. Inter space in between walls is tightly packed with glass wool to minimize radiation heat loss. Stainless steel perforated trays at adjustable height. Double walled insulated door mounted on heavy-duty hinges and provided with viewing window and locking arrangements. Temperature is controlled by capillary thermostat. Adjustable Air Ventilator is provided at the top. Supplied complete with compact control panel accommodating pilot indicating lamps, on/off switch, thermostat, cord and plug.

.

Designed for continuous shaking of solutions in Erlenmeyer flasks. It is a compact bench type table top model with platform fitted with lotus clamps mounted on a ball bearing crankshafts to give an orbital motion to the flasks with in a diameter of 25mm.

.

The Twin Oven will be constructed as a heavy duty robust construction of double walled chamber with inner chamber made of stainless steel and outer made of cold rolled mild steel sheets finished in powder coating. The inner chamber accommodates stainless steel shelf at adjustable height.

The Twin Oven will be one above the other and housed in a single external Housing.

.

Double walled chamber, inner made of stainless steel sheets and outer made of cold rolled mild steel sheets duly finished in powder coating. Inter space in between the walls is tightly packed with special grade glass wool.

Inner chamber accommodates performed stainless steel trays at adjustable heights. Insulated double walled door in the front is provided with locking arrangements. Heating is done by Kanthal A1 heating coils, which are evenly distributed on the bottom portion of the chamber.

.

Description / Specification of Laborotary Model

We are involved in offering a wide range of Laborotary Model to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Laborotary Model. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design 

.

Our hot air ovens are constructed using premium grade raw material like stainless steel and other materials. Known for their sturdy construction and functional accuracy, our hot air ovens are available with various optional accessories.

.

Body made of mild steel powder coat painted. Mild steel or SS top. Circular or rectangular. Temperature range up to 300 degree centigrade provided with 3 heat switch and energy regulator. Available in 8,10 and 10*12''

.

Double walled chamber, Interior, Perforated Basket and the Domed Lid made of polished Stainless steel, argon arc welded and Exterior made of Stainless steel sheets / Cold rolled mild steel sheet finished in powder coating. The Lid is tightened with wing nut.

.

Double walled unit, mounted horizontal on a sturdy heavy mild steel tubular stand. Interior, Boiler and the Lid made of polished Stainless steel argon arc welded and Exterior made of Stainless steel sheets /Cold rolled mild steel sheet finished in powder coating. The Lid is tightened with radial locking system. Heating elements are Immersion type Heaters. The Unit is fitted with Neoprene Rubber Gasket to ensure tight sealing. Separate valves are provided for injection of steam into the chamber and

.

Double walled chamber, inner made of thick stainless steel sheets and outer made of CRCA Sheets duly finished in powder coating. Glass Window provided in the front side for an easy inside view.

.

Double walled chamber, inner made of stainless steel and outer made of cold rolled mild steel sheets and attractively finished on powder coat painting. The inter space in between the walls is tightly packed with special grade glass wool to avoid thermal losses.

.

Single walled completely made of stainless steel. The temperature is controlled by a thermostat from ambient +5 to 90 ºC with a control accuracy of ± 5 ºC. The bath is provided with two pilot lamps concentric rings ON/OFF switch, wire and plug to work on 230 VAC.

.

Double walled chamber, inner made of Stainless Steel and outer made of cold rolled mild steel sheet and finished powder coating. The inter space in between the wall is tightly packed with special grade glass wool to eliminate radiation heat loss to the minimum.

.

Double walled chamber, inside made of Stainless Steel and outside made of cold rolled mild steel sheets with powder coat finish. Inter space in between walls is tightly packed with special grade glass wool on all the sides. The inner chamber accommodates perforated and removable diffuser shelf. The led is also made of stainless steel and provided with handle.

.

Double walled chamber, inner made of polished stainless steel and outer is mad of mild steel sheet with powder coat finish. Inter space between the walls is insulated with special grade glass wood.

.

The outer shell is made of thick cold rolled mild steel plates suitably reinforced with vertical channel iron frame to make the equipment mechanically very rigid.

The inner chamber is formed by ceramic fibre module suitably interlocked and tightened with stainless steel studs and cup locks. The hearth of the chamber will be made of refractory bricks to withstand concentrated heavy loads.

.

Double walled chamber rectangular in shape, outer made of cold rolled mile steel sheets and finished in powder coating. Inner formed by high temperature withstanding Zirconia vacuum board capable of with standing temperature up to 1450 ºC. the door is opened on top side.

.

The general design and construction comprises of an Outer chamber fabricated out of thick cold rolled mild steel sheets, Rectangular in shape placed horizontally with opening in the front. Refractory Muffle of required size forms the inner chamber. This is surrounded by ceramic fibre blankets on all the four sides and the rear to reduce heat losses to a minimum.

.

Oil sealed rotary vane type mechanical pumps. simple design for easy servicing. Range available from 50 lit/min to 1500 lit / minute. Accessories available.Non return valve, moisture trap,3 way connector with vacuum gauge, exhaust filter and suction filter.

.

The Outer chamber is fabricated out of thick cold rolled mild steel sheets fully reinforced to make the equipment mechanically very rigid. The inner chamber is fabricated out of thick M.S .The door is double walled, single / double door fabricated out of thick mild steel. The door is provided with heavy-duty hinges and is gasket to effectively seal the chamber when in closed condition. The door is provided locking device. The chamber is heated by means of Electrical / Gas / Diesel depending on application and preference. Uniform temperature is achieved in the inner chamber by powerful blowers. Ventilation is provided for venting the moisture/fume. Trolley will be fabricated out of thick M.S./ SS angle framework having wheels for easy transportation. Each trolley will have provision to accommodate Trays. Control Panel/side mounted type accommodating, Digital Temperature indicator, On/off Switches, Indicating Lamps etc.

.

Double walled chamber. Inner chamber made of thick Stainless steel well polished and fusion welded. The outer chamber is made of cold rolled steel sheets and attractively finished in powder coat finish. The inner chamber accommodates Stainless Steel Trays at adjustable height.

.

Heavy-duty robust construction with inner chamber made of stainless steel and outer made of cold rolled mild steel sheets finished in powder coating. The inter space in between the walls is tightly packed with superior grade glass wool.

.

Double walled chamber, inner chamber is made of thick Stainless steel and outer chamber is made of cold rolled steel sheets with powder coat finish. High-class insulation with ‘UUF’ is provided between the two walls to minimize the sweating in humid condition and loss in cooling. The chamber will be mounted on wheels.

.

Heavy duty robust construction with inner chamber made of stainless steel and outer made of stainless steel and outer made of S.S / cold rolled mild steel sheet finished in powder coating. The inner chamber accommodates stainless steel shelf at adjustable height. Double walled door, is provided with Glass Window which allows inspection of samples without disturbing the inner chamber temperature.

.

Double walled construction, interior made of thick gauge stainless steel sheets and exterior made of cold rolled mild steel sheets finished in powder coat. Inter space in between the walls is packed with special glass wool. The door is double walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height.

.

The outer chamber and inner chamber is fabricated out of thick stainless steel material. The door is double walled, single/double door fabricated out of thick stainless steel. The door is provided with heavy-duty hinges and is gasketed to effectively seal the chamber when in closed condition. The door is provided locking device.

.

The outer chamber is made of mild steel sheets powder coated with corrosion and rust proof coating. The inner chamber is made of stainless steel sheets of 304 Grade. Provisions are given in the unit to rise or lower to maximum of 10 cm height. Castor wheels are provided for easy movement.

A spirit level provided inside the chamber aids in maintaining the even level. The unit is insulated by special grade ceramic wool to a thickness of approximately 60 to 75 mm., lock and key arrangement. Air circulation fan assembly with blower and suitable motor incorporated.

.