|
| |
| Water Pumps |
VEMC are channel partners of Kirloskar water pumps. These pumps are suitable for a variety of different applications demanding cost efficient supply and reliability. Water pumps are applied in Air-conditioning, Refrigeration, Cooling towers, Industries for clear water handling at higher pressures, Fire fighting into various industries. We offer Back Pullout pumps, Horizontal Split casing centrifugal pump & Multistage centrifugal pumps.
|
|
|
|
|
| Process Pumps |
VEMC supplies centrifugal process pumps for various industrial applications and processes. The pumps are available in various MOC's so as to handle liquid and chemicals of both acidic and abrasive nature. Apart from this VEMC also offers glandless and seal less pump for chemicals which are highly hazardous and highly inflammable liquids
|
|
|
|
|
| Fm And Ul Fire Pump Sets |
Description:
Overview:
FM Approved UL Listed Fire Fighting Set. Standard Fire Fighting Set Multi Stage Multi Outlet (MSMO) Fire Fighting Set Containarised Fire Fighting Set
Features:
Application:
Diesel engine driven pumpset Main fire pump ? FM approved / UL listed Diesel engine ? FM approved / UL listed heat exchanger cooled Engine Controller ? FM approved / UL listed Secondary water ? cooling loop Space saving solution ? Multistage multi outlet pump Packaged Fire Pump House Jockey pump with controller mounted on separate skid where controller is FM approved or UL listed Engine Controller ? FM approved / UL listed Engine Controller ? FM approved / UL listed
|
|
|
|
|
| Canned Motor Pumps |
Description:
Overview:
Canned Motor Pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.
Features:
No seal-no leakage No coupling-no alignment and no vibration problem No separate lubrication of bearing and no contamination of lubricant No antifriction bearings Small and compact design resulting in saving in installation space Easy maintenance and longer life Extremely low noise level Absolute safety from risks of fire, explosion and leakage Automatic thrust balancing Vacuum tight construction prevents air contamination of process liquids
Application:
The high reliability of these pumps makes them suitable for pumping of toxic, hazardous liquids, high temperature, high pressure services in nuclear power plant, Lithium Bromide circulation in refrigeration plant, Ammonia transfer in fertilizer plants, refineries, chemical and pharmaceutical industries and other process industries for handling toxic, hazardous or expensive fluids.
Specification:
The high reliability of these pumps makes them suitable for pumping of toxic, hazardous liquids, high temperature, high pressure services in nuclear power plant, Lithium Bromide circulation in refrigeration plant, Ammonia transfer in fertilizer plants, refineries, chemical and pharmaceutical industries and other process industries for handling toxic, hazardous or expensive fluids.
|
|
|
|
|
| Vertical Turbine Pumps |
Description:
Overview:
Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.
Features:
Vibration-free performance Low submergence No priming required Dry pit/Wet pit arrangement available Direct drive/Right angle gear drive Impeller pull-out/Non-pull-out Bowl pull-out/Non-pull-out Gland packed / Mechanical seal 50Hz / 60Hz availability
Application:
Water supply Pumps Irrigation Pumps Cooling tower Thermal and Nuclear power plants Steel, Cement industries Refineries Sea water on off-shore platforms Condensate extraction Fire fighting Pumps Flood control Dry Docks
Specification:
Delivery size up to 2200 mm Capacity up to 40,000 m3 /hr Head up to 200 m
|
|
|
|
|
| Non Clog Pumps |
Description:
Overview:
SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.
Features:
Solid size up to 105 mm Back pull-out design Gland packed / Mechanical Seal 50 Hz / 60 Hz availability Also available in vertical execution
Application:
Sludge Sewage Power material slurries Sugar factory waste
Specification:
Delivery size up to 200 mm Capacity up to 800 m3/hr Head up to 90 m Temperature (-) 10 degree C to 140 degree C
|
|
|
|
|
| Multi Stage Multioutlet Pumps |
Description:
Overview:
These are of gland packed with a mechanical seal used mainly in fire fighting, booster service, mine dewatering and so on. These pumps have a delivery size of 250mm.
Features:
Gland packed / Mechanical seal 50Hz / 60Hz availability
Application:
Fire fighting Booster Service Mine Dewatering Boiler feed
Specification:
Delivery size up to 250 mm Capacity up to 850 m3 /hr Head up to 580 m Temperature (-) 40 degree C to 140 degree C
|
|
|
|
|
| Vaccum Pumps |
Description:
Overview:
In order to withstand wide voltage fluctuations vacuum pumps are designed with an impeller of high quality of bronze material. These pumps are designed to prevent overloading and motor burning. These pumps come with sturdy casing, provided with foot, suction and delivery nozzles. Widely used in priming of large pumps, extrusion machines, printing machines and so on.
Features:
Voltage range from 180V to 240V for single phase Voltage range from 300V to 440V for three phase Class of insulation ?B? Models are with IP-44 protection
Application:
Drying Evaporation Mine Dewatering Evacuation of air from suction pipes and chambers Filtration Sterilisation Condensation Priming of large pumps Twist drilling machine Bottle filling
Specification:
Vacuum up to 650 mm of Mercury Air flow rate up to 55 m3 /hr Power rating 0.75 kW to 2.2 kW (1 hp to 2 hp)
|
|
|
|
|
| Tiny Pearl |
Description:
Overview:
These pumps are designed with aluminium extruded motor body for better heat dissipation and corrosion resistance. Double shielded ball bearing ensures no external lubrication. Impeller is of high tensile brass and delivery casing is of cast iron. These are used in bungalows, hospitals, small fountains and so on.
Features:
Aluminum extruded body Self priming Thermal overload protection Totally enclosed fan cooled motor
Application:
Bungalows Industries Solar heating system Sprinklers Hospitals Small fountains
Specification:
Head range up to 24 m Discharge range up to 2000 LPH Power rating up to 180 W (0.25 HP)
|
|
|
|
|
| Dewatering Pumps |
Description / Specification of Dewatering Pumps
We are involved in offering a wide range of Dewatering Pumps to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Dewatering Pumps. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
| Sewage Pumps |
Description / Specification of Sewage Pumps
We are involved in offering a wide range of Sewage Pumps to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Sewage Pumps. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
| Wafer And Lugged Butterfly Valve |
Description:
Overview:
KBL is pleased to offer top-of- line product in pipeline flow control. Kirloskar wafer and lugged Butterfly valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product quality and dependable performance.
Features:
Top plate double drilled to fit ISO 5211 dimensions and standard secondary bolt circle dimensions Unique centre-lock seat design virtually eliminates any seat movement during the seating and un-seating of the disc Unique stem retention system to provide blow-out proof stem and easy assembly and disassembly of valve Heavy duty one piece wafer and lugged wafer body designed to withstand specified pressures Nylon coated high strength disc with hand polished disc edge and hubs ensures excellent corrosion resistance to several chemical media Heavy duty square grooved seat design with moulded O-ring seals to serve as flange gasket One piece stem with close tolerances double D drive eliminates the need for disc screws or taper pins Heavy duty bearing absorbs the forces acting on the stem/disc assembly due to line pressure
Application:
Water works Power plants Sewage plants Process industries Chemical and petrochemical plants
Specification:
Manufacturing Standard - API609/ BSEN 593 (BS 5155) Size Range 50 to 600 mm Pressure Ratings PN10, PN16 End Connection To suit ANSI # 125/ 150
|
|
|
|
|
| Double Flanged Butterfly Valve |
Description:
Overview:
With a low operating torque these valves have very sturdy and robust design. KBL has successfully carried out Flow Test on large size Butterfly Valves including 2200 mm in its in-house Hydraulic Research Centre at Kirloskarvadi. Another feature which makes KBL butterfly valves competitive in the market is its low life cycle cost and lower maintenance. With centric type pressure up to PN 1.6/Class 250, these valves find wide application in water works, water/effluent/sewage treatment plants and so on.
Features:
Rigid and sturdy design with minimum loss of head across the valve Compact, light weight, low operating torques Eccentric seat geometry results in less wear and tear and longer life Self cleaning and non jamming seat design Gas tight shut-off Self energizing seating design Combined 'O' ring and 'U' cup seating on shaft Through flow disc design for large size Butterfly Valves
Application:
Water works Power plants Sewage plants Process industries Chemical and petrochemical plants
Specification:
Manufacturing Standard BS 5155 (BS EN 593)/ AWWA C504/ IS 13095 Size Range 50 to 4500 mm Pressure Ratings PN6, PN10, PN16, PN20 Class -75, 150, 250 End Connection Double Flanged
|
|
|
|
|
| Non Rising Spindle Gate Valves |
Description:
Overview:
These valves are available in non rising as well as rising spindle type suitable for clear water up to 450 C. These valves are designed with total compliance with applicable design and testing standards. All designs are validated for stress analysis. Sluice valves find wide application in water works, water/effluent/sewage treatment plants.
Features:
Rigid and sturdy design Low pressure loss across the valve Suitable for clear water up to 45 C and 5000 ppm turbidity, other fluids with maximum pressure / temperature conditions within the scope of IS:14846 Long service life and leak-tightness even after thousands of open / close cycles
Application:
Water works Water / Effluent / Sewage treatment plants Fire Fighting Power
Specification:
Manufacturing Standard - BS 5163 / IS14846 Size Range 32 to 1500mm Pressure Ratings PN10, PN16 End Connection Flanged
|
|
|
|
|
| Rising Spindle Gate Valve |
Description:
Overview:
These valves are available in non rising as well as rising spindle type suitable for clear water up to 450 C. These valves are designed with total compliance with applicable design and testing standards. All designs are validated for stress analysis. Sluice valves find wide application in water works, water/effluent/sewage treatment plants.
Features:
Rigid and sturdy design Low pressure loss across the valve Suitable for clear water up to 45 C and 5000 ppm turbidity, other fluids with maximum pressure / temperature conditions within the scope of IS:14846 Long service life and leak-tightness even after thousands of open / close cycles
Application:
Water works Water / Effluent / Sewage treatment plants Fire Fighting Power
Specification:
Manufacturing Standard - BS 5163 / IS14846 Size Range 32 to 1500mm Pressure Ratings PN10, PN16 End Connection Flanged
|
|
|
|
|
| Swing Check Type Reflux Valves |
Description:
Overview:
These valves are very useful in preventing back flow of water to the pump. These valves have minimum head loss and can be very competitive in terms of long service life. These valves are very useful in waterworks pipelines to reduce hammer effect. Non slam and quick closing characteristics have made this product a very demandable one across markets.
Features:
Swing check type design Rigid and sturdy design with minimum head loss Long service life and leak-tightness of high order Suitable for clear water having turibidity upto 3000 o ppm and temperature of 65 Centigrade (rubber to o bronze / stainless steel seating) and upto 95 Centigrade (Bronze/ bronze, stainless steel / stainless steel seating
Application:
Used in waterworks piplines to reduce water hammer effect Preventing back flow of water to the pump
Specification:
Manufacturing Standard BS 5153 (EN 12334) / IS 5312 Part 1 & 2 Size Range 40 to 1500 mm Pressure Ratings PN6, PN10, PN16 End Connection Flanged
|
|
|
|
|
| Cast Iron Swing Type Check Reflux |
Description:
Overview:
These valves are very useful in preventing back flow of water to the pump. These valves have minimum head loss and can be very competitive in terms of long service life. These valves are very useful in waterworks pipelines to reduce hammer effect. Non slam and quick closing characteristics have made this product a very demandable one across markets.
Features:
Swing check type design Rigid and sturdy design with minimum head loss Long service life and leak-tightness of high order Suitable for clear water having turibidity upto 3000 o ppm and temperature of 65 Centigrade (rubber to o bronze / stainless steel seating) and upto 95 Centigrade (Bronze/ bronze, stainless steel / stainless steel seating
Application:
Used in waterworks piplines to reduce water hammer effect Preventing back flow of water to the pump
Specification:
Manufacturing Standard: BS 5153 (EN 12334) / IS 5312 Part 1 & 2 Size Range : 40 to 1500 mm Pressure Ratings : PN6, PN10, PN16 End Connection : Flanged
|
|
|
|
|
| Cast Steel Gate Valves |
Description:
Overview:
These valves are widely used as for Naptha and Naptha derivatives in oil refineries. With a flanged end connection, these valves are designed with API 600 standards. Its rigid and sturdy design along with low pressure across the valve make it a very formidable model in the entire product line.
Features:
Double Flanged / butt weld end, outside crew rising stem, yoke type bonnet Back seating bush arrangement to enable re - packing under pressure Rigid & sturdy design Low pressure loss across the valve Long service life and leak tightness
Application:
Naptha and naptha derivatives in oil refineries Water, steam, air, gas and liquids having corrosive properties Suitable for wide range of working conditions of pressure and temperature ratings
Specification:
Manufacturing Standard API 600 Size Range and Pressure Ratings 50 to 750 mm : Class 150 50 to 600 mm : Class 300 50 to 350 mm : Class 600
|
|
|
|
|
| Cast Steel Globe Valves |
Description:
Overview:
These valves are widely used for Naptha and Naptha derivatives in oil refineries. With a flanged end connection, these valves are designed with BS1873 standards. Its rigid and sturdy design along with low pressure across the valve make it a very formidable model in the entire product line.
Features:
Double Flanged / butt weld end, outside screw rising stem, yoke type bonnet Back seating bush arrangement to enable repacking under pressure Rigid and sturdy design Long Service Life
Application:
Naptha and naptha derivatives in oil refineries Water, steam, air, gas and liquids having corrosive properties Suitable for wide range of working conditions of pressures and temperature ratings
Specification:
Manufacturing Standard BS 1873 Size Range and Pressure Rating 25 to 400 mm Class 150 25 o 300 mm Class 300 End Connection Flanged
|
|
|
|
|
| Cast Steel Check Valves |
Description:
Overview:
These valves find wider usage in water, stream, air, gas and liquids having corrosive properties. These valves are made by using materials after carrying out all quality checks and processed by adhering stringent quality parameters. The rigid sturdy design promises a longer life span.
Features:
Swing check type, Double flanged /butt weld end, bolted cover design Rigid and sturdy design with long service life
Application:
Naptha and naptha derivatives in oil refineries Water, steam, air, gas and liquids having corrosive properties Suitable for wide range of working conditions of pressures and tempertaure ratings
Specification:
Manufacturing Standard : BS 1868 Size Range and Pressure Rating : 25 to 700 mm : Class 150 65 to 700 mm : Class 300 100 450 mm : Class 600 End Connection : Flanged
|
|
|
|
|
| Conventional Kinetic Air Valve |
Description:
Overview:
Kinetic air valves are commonly used in air venting/air admission services in water pipelines. Performance of a kinetic air valve is severely affected by tampering the valve with an external mechanism. Tamper proof Kinetic Air Valves provide longer service life and cost effective maintenance. With cast iron body, cover and cowl it has a pressure rating of PN 1.0-1.6.
Features:
Double Orifice Type (Small and large orifice), kinetic type Single air valve Non clogging and self sealing balls for trouble free operation Totally tamper proof kinetic air valve series available. Suited for turbid or clear water sewage; releasing air when water mains are being filled and admitting air while being emptied. Cuts loss of water when water mains are full Releasing air accumulated under pressure in pipe during normal conditions.
Application:
Water Supply Lines / Distribution Lines Clear Water and sewage applications
Specification:
Manufacturing Standard : IS 14845 Size Range : 50 to 250 mm Pressure Ratings : PN6, PN10, PN16
|
|
|
|
|
| Tamper Proof Kinetic Air Valve |
Description:
Overview:
Kinetic air valves are commonly used in air venting/air admission services in water pipelines. Performance of a kinetic air valve is severely affected by tampering the valve with an external mechanism. Tamper proof Kinetic Air Valves provide longer service life and cost effective maintenance. With cast iron body, cover and cowl it has a pressure rating of PN 1.0-1.6.
Features:
Double Orifice Type (Small and large orifice), kinetic type Single air valve Non clogging and self sealing balls for trouble free operation Totally tamper proof kinetic air valve series available. Suited for turbid or clear water sewage; releasing air when water mains are being filled and admitting air while being emptied. Cuts loss of water when water mains are full Releasing air accumulated under pressure in pipe during normal conditions.
Application:
Water Supply Lines / Distribution Lines Clear Water and sewage applications
Specification:
Manufacturing Standard : IS 14845 Size Range: 50 to 200 mm Pressure Ratings : PN6, PN10, PN16, PN 20
|
|
|
|
|
| Kinetic Air Valve |
Description:
Overview:
Kinetic air valves are commonly used in air venting/air admission services in water pipelines. Performance of a kinetic air valve is severely affected by tampering the valve with an external mechanism. Tamper proof Kinetic Air Valves provide longer service life and cost effective maintenance. With cast iron body, cover and cowl it has a pressure rating of PN 1.0-1.6.
Features:
Double Orifice Type (Small and large orifice), kinetic type Single air valve Non clogging and self sealing balls for trouble free operation Totally tamper proof kinetic air valve series available. Suited for turbid or clear water sewage; releasing air when water mains are being filled and admitting air while being emptied. Cuts loss of water when water mains are full Releasing air accumulated under pressure in pipe during normal conditions.
Application:
Water Supply Lines / Distribution Lines Clear Water and sewage applications
Specification:
Manufacturing Standard : AWWA C512 Size Range : 50 to 200 mm Pressure Ratings : PN10, PN16
|
|
|
|
|
| Foot Valve |
Description:
Overview:
This is also known as swing type valve. These valves are designed with perfect flat seating for better sealing. With a pressure rating of PN 0.2 these valves are widely used in suction side of pump to avoid flow reversal.
Features:
Rigid and sturdy design with minimum loss of head across the valve Perfectly flat seating surfaces for good sealing Preventing entry of foreign body to pump through suction pipe Long service life
Application:
Used in suction side of pump to avoid flow reversal from pump to sump with monobloc pumps
Specification:
Manufacturing Standard : IS 4038 Size Range : 50 to 600 mm Pressure Rating : PN 2
|
|
|
|
|
| F.M. Approved Gate Valve |
Description:
Overview:
KBL has emerged as India's first and only valve manufacturer to get the Certificate of Compliance from Factory Mutual for its fire service water control valves, which covers Outside Screw & Yoke and Non-Rising Stem Gate Valves (Metal Seated)
Features:
Metal to metal seating for longer service life Rigid and sturdy design with minimum loss of head across the valve Accurate interchangeability of components Accurate parallelism between side flanges Equal taper between wedge faces Perfect machining and press fitting of body and wedge rings Excellent finish on spindle threads resulting in low friction and smooth operation of valves Leak-tightness even after thousands of Open / Close
Application:
Fire service water control valves
Specification:
Manufacturing Standard IS 14846 Size Range 50 to 250 mm Pressure Rating 250 PSI End Connections Flanged
|
|
|
|
|
| Forged Steel Gate Valve |
Description:
Overview:
These valves are widely used in Refineries and Petrochemical Industries, Fertilizer Plant, Thermal Power Plant and other process industries. With socket and screwed end connection, these valves are designed for handling very high pressures. Its rigid and sturdy design along with low pressure across the valve make it a very formidable model in the entire product line.
Features:
Rigid and sturdy design Long service life with leak tightness Back seating surfaces provided integral to bonnet
Application:
Refineries and Petrochemical Industries Fertilizer Plant Themal Power Plant Other Process Industries
Specification:
Manufactured Standard: API 602/ BSEN 15761 (BS: 5352) Size Range: 8 to 50 mm Pressure Rating: Class 800 End Connections: Socket weld, Screwed End
|
|
|
|
|
| Forged Steel Globe Valve |
Description:
Overview:
These valves are widely used in Refineries and Petrochemical Industries, Fertilizer Plant, Thermal Power Plant and other process industries. With socket and screwed end connection, these valves are designed for handling very high pressures. Its rigid and sturdy design along with low pressure across the valve make it a very formidable model in the entire product line.
Features:
Rigid and sturdy design Long service life with leak tightness Back seating surfaces provided integral to bonnet
Application:
Refineries and Petrochemical Industries Fertilizer Plant Themal Power Plant Other Process Industries
Specification:
Manufactured Standard: API 602/ BSEN 15761 (BS: 5352) Size Range: 8 to 50 mm Pressure Rating: Class 800 End Connections: Socket weld, Screwed End
|
|
|
|
|
| Forged Steel Check Valve |
Description / Specification of Forged Steel Check Valve
We are involved in offering a wide range of Forged Steel Check Valve to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Forged Steel Check Valve. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
| Ball Valve |
Description:
Overview:
These valves are manufactured as per IS: 9890/EN ISO 17292/BS 5351 specifications for wide spread usage in refineries, fertilizers and petro chemical industries. These are single piece/ three piece design, full bore/reduced bore. All compliance as well as application design and testing standards are maintained for smooth functioning of these valves.
Features:
Single piece / three piece design, full bore / reduced bore Ends - Screwed / Socket weld / Flanged end
Application:
Refineries Fertilizers & Petro Chemical Thermal Power Stations Process Industries
Specification:
IS:9890 / EN ISO 17292 / (BS 5351) RANGE: Sizes 15 mm to 300 mm Pressure Class 150# and 300# End Connections : Flanged / Screwed / Socket Weld
|
|
|
|
|
| Spectrum A.C. Motors |
Description:
Overview:
Features:
Ambient Temperature -10 to +50 degree C Altitude Not exceeding 1000mtrs above mean sea level. Atmosphere Non corrosive & non hazardous Relative Humidity Up to 100% Voltage 415V?10% , 3 pH Frequency 50Hz ?5% Combined Variation 10% Duty S1 (continuous) Service factor 1.0
Application:
Specification:
Starting Star Delta/DOL (with shorting links but with 2 entries) Permissible starts/hr. Cold successive - 4 hot successive - 3 equally spread - 6 Loading at reduced volts 75% Rated volts for 5 minutes Insulation / temp.rise Class `F' / 70 deg. C Direction of rotation Bi-directional No. Of leads 6 Connection. Delta Degree of protection IP 55 Method of cooling IC 411 T.box position RHS looking from driving end Bearing life (90% survival basis) 40,000 working hrs. For direct drive 20,000 working hrs. For belt drive Vibration Normal class as per IS 12075 Noise As per IS 12065 Construction Foot, 'B' flange, Foot cum 'B' flange Frame sizes SC 180 to 355 (For 'B' flange mounting, ratings covered in SC180M to be offered in VSC180L, & ratings covered in SC225S to be offered in VSC225M) Shaft extension Single cylindrical extension as per IS: 1231 Body material Cast iron T.box material Cast iron up to 225 frame, mild steel for 250 to 355 frame Fan material Polypropelene for 4, 6, & 8 pole & cast iron for 2 pole up to 225 frames. Mild steel for 250 to 355 frames for all polarities Accessories Nil Paint & shade NC base RAL5012 shade up to 225, Epoxy base RAL5012 above 225 frame Bearing type and Greasing facility Open type bearings for SC180 to 355 Online greasing facility for SC180 to 355
|
|
|
|
|
| Crane Duty Cage Motors |
Description:
Overview:
Features:
Ambient Temperature -10 to +50 degree C Altitude Not exceeding 1000mtrs above mean sea level. Atmosphere Non corrosive & non Hazardous Relative Humidity Up to 100% Voltage 415V ?10%, 3 Ph. Frequency 50Hz ?5% Combined Variation 10% Duty S3, S4 & S5 Service factor 1.0
Application:
Specification:
Starting DOL Loading at reduced volts 75% Rated volts for 5 minutes. Insulation Class `F' Temp rise 'F' Direction of rotation Bi-directional No. Of leads 3 up to 100 Frame, 6 for 112 and above Frames Degree of protection IP 55 Method of cooling IC 411 T.box position Side (RHS looking from DE, towards DE) Bearing life (90% survival basis) 40,000 working hrs. For direct drive 20,000 working hrs. For belt drive Vibration Normal class as per IS 12075 Noise As per IS 12065 Construction Foot Frame sizes 80 to 225 Shaft extension Single cylindrical extension as per IS 1231 Body material Aluminium up to 112, cast iron above 112 Frames T.box material Cast iron Fan material Polypropelene up to 112, cast iron for 132,160, aluminium for 180 to 200 Accessories Nil Paint & shade NC base RAL 5012 shade Bearing type Greasing facility Open type bearings for 80 to 200. No online greasing facility for up to 160 Frame. Online greasing facility for 180 to 225
|
|
|
|
|
| Rerolling Mill Duty Motor |
Description:
Overview:
Features:
Ambient Temperature 0 to +45 degree C Altitude Not exceeding 1000mtrs above mean sea level. Atmosphere Non corrosive & non hazardous Relative Humidity Up to 100% Voltage 415V?10% (Can also be offered upto 650V) Frequency 50Hz. ?5% Combined Variation Any combination of voltage and frequency
Application:
Specification:
Starting Stator Rotor Starter/Liquid Rotor Starter Permissible starts/hr. 2 Hot Or 3 Cold or 4 Equally spread Loading at reduced volts These motors are designed to run at 75% of rated supply voltage for a duration of five minutes. Insulation / temp.rise Class F/F Temp rise Stator/Rotor Class B/F Direction of rotation Bi-directional No. Of leads TR 5&6 > ST: 6 and RT: 3 Rest 3 / 3 Degree of protection IP23 Method of cooling IC01 T.box position Left hand side when viewed from non-drive end, reversible assembly at site is not possible. Terminal box arrangement For KCW 450 & 500: Stator ? 43506201, Rotor ? 43521599. For KCW 560: Stator ? 41102205, Rotor ? 43506101. Terminal box rotatable through 3600 in steps of 180 degree (i.e cable entry possible from top or buttom) Bearing life(90% survival basis) Lithium based grease to inch Grade 3 inch as per IS: 7623 for 4 pole & above motors. Lubricant Direct drives: 40,000 working hours.(Based on 90% survival life) Vibration Normal class as per IS: 12075. Noise As per IS: 12065. Shaft extension. Single cylindrical extension as per IS: 1231. Body material Mild Steel T.box material Mild Steel Fan material Mild Steel Accessories Refer to Kirloskar Electric engineering department. Paint & shade Epoxy inch RAL BLUE inch to shade plate K-102 Bearing type and Greasing facility Antifriction rolling contact (Ball & Roller) Online greasing facility for all frames
|
|
|
|
|
| Laminated Yoke D.C. Motors |
Description:
Overview:
Features:
Small 0.75 to 300 80 to 250 Medium 150 to 1500 280 to 630 Large 720 to 6500 710 to 1000 by centre height up to 3100 MM by rotor diameter
Application:
Specification:
Standards BS 5000/IS 4722 Insulation CLASS F/CLASS H Armature Voltage 110 to 1000 volts Field Voltage 180 to 360 volts Cooling IC 01/06/0041/0666/W37A86/17/44 Protection IP 23/44/54 Mounting B3/B35/B5/V1/V5
|
|
|
|
|
| Mill Duty Motors |
Description:
Overview:
Features:
kW Range 1.5 to 970 kW Frame Size 802 to 824
Application:
Specification:
Standards BS 5000/IS 4722 Insulation Class F/Class H Armature Voltage 110 to 1000 Volts Field Voltage 180 to 360 Volts Cooling IC 01/06/0041/0666/W37A86/17/44 Protection IP 23/44/54 Mounting B3/B35/B5/V1/V5
|
|
|
|
|
| Pressure Booster System And Hydro Pneumatic System And Hypn System |
Description:
Pressure Boosting Hydro-Pneumatic System (HYPN)
Types of Systems:
- Constant Speed System – FX : Tank Filling Water Transfer, Residential housing, Small size commercial – Residential buildings
- Cascade system – MX (Only 1 VFD common to all pumps) : Medium size commercial – Residential buildings, Demand based industrial applications
- All Pump VFD system – EX ( all pumps having their individual VFD) : Townships, Hospitals, Airports, Malls, Metros, Demand based industrial applications
Offerings:
- Pumps: Long & Short Coupled Pumps, Single & Double Suction Pumps Vertical Inline Single & Multistage Pump
- Motors: EFF2, EFF1 & Higher Efficient
- Control Panel: Wall & floor mounted panels
- Energy Saving and Efficiency Sustainable Coatings: Glass flake coating on Pumps, Valves, Tanks, and Pipes etc.
- Accessories: Skid (Suction and Discharge header, NRVs, Isolating Valves, Pressure Switch/ Pressure Transmitter), Pressurised tank, Solenoid valves, Float switches
|
|
|
|
|
| D.G. Sets |
Featues:
Foot print best in the industry-compact in size
Fuel efficient sets on par or better with leading brands in the industry
Detachable fuel tank - Ease for fuel filling Microprocessor based Bliss Ear Monitor with protection for both Engine and Alternator
- Efficient switching cum protection by devices like MCB/MCCB
- Hydraulic tappet adjustment ensuring long intervals between overhauls-Economy
- Longer Life of parts
- Ideally located lifting provision for ease of handling and safety to the DG sets
- Single window service
INDUSTRY APPLICATIONS:
- Defence
- Builders
- Industries
- Telecom
- Fertilizers
- Railways
- Institutions
- Banks
- Petrol Bunks
- Convocation centers
- Retail chain
- • School & college
|
|
|
|
|
| Containerized Fire System |
Description:
Each Containerized Fire System, a pre-packaged pump house, is delivered to site complete with the pumps and with the necessary pipe work, valves, wiring, heating, lighting and drainage, all packaged within in an insulated steel enclosure and mounted on a structural base plate.
Containerized Fire System offers several key benefits:
- Reduced labor requirements/costs on site
- Reduced ground-works
- All are fully assembled and pre-tested in a quality controlled environment
The installation-to-operation time is minimal. Our enclosed systems are typically built as an integrated pump and control centre with:
- Diesel engine
- All the required controllers
- In-house piping
- Fittings
- Interconnected wiring
- A complete installation that meets the requirements of UL, FM, NFPA 13 and NFPA 20
|
|
|
|
|
| Kirloskar Genuine Pump Spares |
Description:
Fast Reliable and single source delivery
Ensures Optimum pump performance
Inventory Management
- Reduce Inventory costs
- Optimizes stock level
- Free up staff from stock management
- Release stocks space for other uses
Use of Original spare parts ensure
- Increased parts life time
- Longer meantime between repairs
- More reliable operations
- Fewer unexpected failure
- Reduce Life cycle cost
|
|
|
|
|
| Cast Resin Transformers |
Description:
Range:
160 KVA 11KV up to 10,000 KVA, 33 KV Class
In addition to the above, we have the expertise to design, manufacture, & test cast resin dry type transformers for a client's special and stringent requirements to converter, rectifier, static excitation and other special applications as well.
Standards:
The cast resin dry type transformers are designed and tested to comply with national & international standards such as IS 11171, IEC 60726, ANSI, NEMA, and Australian Standard.
Kirloskar Electric manufactures cast resin dry type transformers with technical know-how from May & Christie, Germany & Ocrev, Italy.
|
|
|
|
|
| Distribution Transformers |
Description:
Range:
160 kVA to 2500 kVA, up to 33 kV Class
Standards:
Distribution and power transformers: IS: 2026, BS: 171 & IEC: 76
Converter transformers: IS: 4540, IEC: 146 & IEEE: 444.
Furnace transformers: IS: 2026
System earthing transformers: IS: 3150 & BS: 4944.The company is capable of manufacturing transformers to any other standards as per customers'/consultants' requirements
|
|
|
|
|
| Power Transformers |
Description:
Range:
2500 kVA to 100,000 kVA, up to 220 kV Class
Standards:
Distribution and power transformers: IS: 2026, BS: 171 & IEC: 76
Converter transformers: IS: 4540, IEC: 146 & IEEE: 444
Furnace transformers: IS: 2026
System earthing transformers: IS: 3150 & BS: 4944.The company is capable of manufacturing transformers to any other standards as per customers'/consultants' requirements
|
|
|
|
|
| Corrocoating And Refurbishing |
VEMC in association with Kirloskar Corrocoat has been undertaking turnkey projects for supply and application of coatings on variety of electro mechanical equipments. Our highly skilled and experienced team carries out the work with complete professionalism. Corrocoat services help our customers to not only preserve the life of their high-priced equipments but also to reduce its operating cost by improving efficiency.
At VEMC, we believe in Care and Cure. We care for your equipments by providing appropriate consultancy and services at various levels so that they work with optimum efficiency. We cure your equipments for any adverse effects due to corrosion. For this, we prefer and suggest preventive measures. To protect your plants, structures and equipments from corroding, we offer protective coatings and linings to new equipments. Corrocoat anti-corrosion technology is a unique tool to combat the effects of harsh operating environments. This improves the life and performance of the equipments. Coating also helps your bottom line by reducing repair, maintenance, replacement and downtime costs. Pumps, valves, pipes, storage tanks and process vessels all benefit from our expert treatment. The combination of high performance composites and mechanical engineering expertise gives you the upper hand in the fight against corrosion.
Corrocoat products and services have been beneficial and fruitful to the most demanding industries of the globe. From oil refineries and offshore rigs to water treatment works and nuclear power stations, all have highly benefited by using this technology. Corrocoat coatings have proved to be your first line of defense in the fight against corrosion.
|
|
|
|
|
| Energy Audit |
We lay high emphasis on energy efficiency and use of renewable energy sources. With this objective in mind, we have started with energy audits to conserve and save energy by carrying out Performance Measurement of Pumps and Motors. This shall help clients adopt best methods to reduce electricity consumption and enhance energy efficiency.
- Our Energy Audit team will analyze your energy systems and provide a superior analysis on your current electricity and thermal consumption and annual energy spend. This would also include specific energy savings proposals along with the associated repayment period of current energy related debt. We offer the following services:
- Walk Through Energy Audit
- Comprehensive and Detailed Energy Audit
- Monitoring of Energy Efficiency Projects (Includes undertaking, implementation and project monitoring).
Through our Corrocoat and Energy Audit services, it is our endeavor to develop a "No Cost and Low Cost" culture. Our focus is to implement measures that can give tangible results to our clients be it in terms of cash or in terms of increased productivity. The crux of these services lies in redesigning the production cycles to reduce energy consumption and achieve higher efficiency.
|
|
|
|
|
| Annual Maintenance |
Motto: To attend all complaints in Mumbai within 24 hours and those outside, within 72 hours.
At VEMC, customer service is not a department, it's an attitude. As businessman Roger Staubach puts it, 'There are no traffic jams along the extra mile'. Each one of us goes that extra mile so that we can exceed expectations. Our attitude and willingness to serve with zeal makes us the preferred choice among customers. A hand-in-glove rapport with our principals and vendors helps us expedite product delivery. We stock materials in advance, at our strategically located warehouses, to save transportation time.
Our service offerings include all types of pre-sales as well as post-sales services and cater to on-field and off-field customer needs. Our team of qualified and experienced engineers understand and speak the customer's language. They are trained to deal with pump, motor, and engine related needs, anywhere in India.
Timely delivery, 24x7 accessibility and prompt response are our constants and make us a company of high repute. With optimum utilisation of our experience and expertise, we continue to move up the value chain.
- Our services span the following areas:
- Installation and Commissioning Support: Installation and commissioning of Kirloskar pump-sets, all over India.
- On-site Services: On-site customer needs attended to, during and after warranty period.
- AMC: Annual maintenance for Kirloskar pump-sets.
- Energy Saving Solutions: Solutions to make products energy-efficient.
- Overhauling: Overhauling services for various pump-sets.
|
|
|
|
|
| Consulting |
VEMC has been providing consulting services to various SITC projects related to electro-mechanical set-ups. We have more than five years of experience in providing value-added solutions on technical and commercial aspects to a wide variety of projects. Our highly trained and experienced core team along with our active network of electro mechanical experts has been delivering quality and efficient services to each new and diverse commission. We have again created a bench-mark by being the most sought solution provider in the industry. Our esteemed clients include government bodies like MCGM, ONGC, Mazgaon Dock, Naval Dock, JNPT, IIT, etc. We are now rendering distinct crucial services like energy audits & corro-coating services to our valued Customers.
|
|
|
|
|
|
|
|
|
