|
|
Hot Air Circulating Oven |
Hot Air Oven Memmert Type GMP Model
- Triple walled in construction.
- Gap between the walls filled with high insulation glass wool. Air Heating Elements are provided on the side walls of the chamber.
- Door gasket provided is made of Food Grade Silicon
- Installed with motorized blower at the top for uniform air circulation.
- Unit works on 230 V Ac, 50 Hz. supply.
- Pre-heating chamber & Outer chamber made of Stainless Steel LM – 304 grade [ 20 swg.] and inner chamber made of Stainless Steel [22 swg.] Mirror finish.
- Microprocessor based AUTO TUNING PID Digital Temperature Indicating Controller to set temp.
- High Temperature Safety cut off provided.
- Rod type Shelves provided are made of Stainless Steel.
|
|
|
|
|
Hot Air Oven |
- Triple walled in construction with Inner made of Stainless Steel – 304 Grade & Exterior of CRCA steel with powder coat finish.
- Interior made of Stainless Steel – 316 grade and Exterior of Stainless Steel - 304 grade matt finish in all GMP MODEL.
- Food grade Silicon Rubber gasket which acts as a perfect sealant.
- Temperature controlled by Dual Display Microprocessor based PID Temperature Controller & PT – 100 sensor.
- Heating elements are made of high grade Nichrome wire and provided on the side walls of the chamber.
- Air circulation by motorized blower placed on top of the oven.
- Available with removable SS Rod shelves.
- Temperature Range: 5°C above ambient to 250°C.
- Temperature Accuracy: ± 1°C or better.
- Safety: Capillary type Thermostat provided to take care of temperature overshoots & in case the PID Controlling system fails.
- Operates on 230 Volts AC Single phase 50 Hz.
|
|
|
|
|
Laboratory Ovens |
Laboratory Oven - Bottom Heater Type
- Double wall construction with Inner made of Stainless Steel – 304 Grade & Exterior of CRCA steel with powder coat finish.
- High density glass wool insulation between walls to prevent heat dissipation.
- Heating elements are made of high grade Nichrome wire and placed at the bottom.
- Temperature Range: 5°C above ambient to 250°C
- Temperature controlled by Capillary Thermostat with +/- 2°C Accuracy.
- Gravity convection.
- Shelves are made of Galvanized wire mesh.
- Operates on 230 Volts AC Single phase 50 Hz.
|
|
|
|
|
Portable Ovens |
SMATO" make Portable Ovens are designed for lower temperatures and are very handy being light weight resulting into easy maneuvering and to hold low loads for heat treating. This model is a special feature catering to the needs of small scale entrepreneurs. The durable, Heavy-Gauge Steel construction offers long product life. Furthermore, our portable models are furnished with Strip Heaters ensures even temperature at points inside the chamber.
This handy portable oven, only 470 mm high and 65 mm in diameter, gives fast access to up to 2 Kg of stabilized rods in the shop or in the field. It operates on 230 volt, AC. Thermostatic control maintains oven temperature in the Ambient to 200°C range. |
|
|
|
|
Portable Rod Oven |
SMATO" make Portable Rod Ovens are lightweight, rugged and completely portable...easy to load, easy to carry...ready to provide low cost control of welding quality in the shop or in the field. Reduce operating costs by providing your welding operators with fast access to electrodes at the point-of-work. There’s a model exactly suited to your requirements.
This handy portable oven, only 475 mm high and 85 mm in diameter, gives fast access to up to 4 kg of stabilized rods in the shop or in the field. It operates on 230 volt, AC. Thermostatic control maintains oven temperature in the Ambient to 250°C range. |
|
|
|
|
Mother Oven |
SMATO" make Mother Ovens are ideal and designed for higher temperature requirements and holding capacities of welding electrodes and are generally stationary models. M.S. shelves and rods inside the oven enable accommodation of varied sizes of welding electrodes for heat treating prior its actual welding act.
Long lasting Finned Tubular Heaters ensure even temperature inside the chamber. Digital controlling system with K Type Thermocouple Sensor ensures fair accuracy and helps maintain temperature inside the oven resulting into even drying of the welding rods for superior quality welding.
|
|
|
|
|
Welding Electrode Drying Oven |
"SMATO" make Welding Electrode Drying Oven are ideal and designed for higher temperature requirements and holding capacities of welding electrodes and are generally stationary models. M.S. shelves and rods inside the oven enable accommodation of varied sizes of welding electrodes for heat treating prior its actual welding act.
Long lasting Finned Tubular Heaters ensure even temperature inside the chamber. Digital controlling system with K Type Thermocouple Sensor ensures fair accuracy and helps maintain temperature inside the oven resulting into even drying of the welding rods for superior quality welding. |
|
|
|
|
Flux Drying Oven |
"SMATO" make Front Loading Submerged Arc Flux Drying Oven
- Suitable for treating different grades of flux simultaneously.
- Forced air circulation for temperature uniformity and faster drying.
- Rugged, steel construction.
- Flexibility in storage and temperature control.
- With trays for handling and storage of flux.
|
|
|
|
|
Electrode Dryer |
These "SMATO" make Electrode Dryer are ideal and designed for higher temperature requirements and holding capacities of welding electrodes
- Compact, modular design with controls recessed for protection.
- Oven fully insulated to prevent heat loss....pilot light indicates oven operation.
- Thermostat control, incorporating on/off switch, maintains oven temperature in 50° C - 250° C range.
|
|
|
|
|
Electrode Baking Oven |
SMATO" make Stationary Welding Electrode Baking Oven
- Forced air circulation for temperature uniformity and faster drying.
- Rugged, steel construction.
- Flexibility in storage and temperature control.
- With Wiremesh Shelves for keeping Welding Rods.
|
|
|
|
|
Portable Carry Ovens |
Description / Specification of Portable Carry Ovens
We are involved in offering a wide range of Portable Carry Ovens to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Portable Carry Ovens. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Bacteriological Incubator |
Description / Specification of Bacteriological Incubator
We are involved in offering a wide range of Bacteriological Incubator to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Bacteriological Incubator. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Lab Incubator |
- Double wall construction with Inner made of Stainless Steel – 304 Grade & Exterior of CRCA steel with powder coat finish.
- High density glass wool insulation between walls to prevent heat dissipation.
- Heating elements are made of high grade Nichrome wire and placed at the bottom, of the unit.
- A transparent full length Acrylic inner door is provided to have a clear inner view of the sample
- Temperature Range : 5°C above ambient to 60°C.
- Temperature controlled by Capillary Thermostat with +/- 2°C Accuracy.
- Gravity convection
- Shelves are made of Galvanized wire mesh
- Operates on 230 Volts AC Single phase 50 Hz.
|
|
|
|
|
|
|
|
|