Most favorable machine for grinding even the hardest material and obtaining continuous production.
High range of fineness is possible if the Dynamic classifier is attached.

Linners, Grinding media may be provided of different hard material like Alloy steel, Ceramic, Granule brick etc.
Suitable for wet as well as dry grinding and mixing.
Application: - Quartz, Feldspar, Paint, Ceramic etc...

JAW CRUSHER SINGLE TOGGLE

Two series of Jaw Crushers are available. Single toggle and Double toggle type.
Single toggle Jaw Crushers have bearings with grease lubrication have simple construction, easy to maintain and economical.
Single toggle Jaw Crusher give higher percentage of fines, hence usually used as Pre Crusher.
Double toggle Jaw Crushers has forced oil lubrication with the help of oil pump and nozzles.

A robustly constructed machine for crushing almost all types of free flowing materials

The most suitable and convenient range to pulverize the maerial between 100 mesh (150 micron) to 10mm.

Usually used without cyclone and dust collector for bigger output particle size. For fine material, a cyclone with dust collector is used.

Impact Pulverizer are used for a wide range of application e.g. Agricultural Chemicals, Carbon & Graphite, Coal, Coke, Coconut Shell & Wood Saw Dust, Clay, Dye Stuff & Pigments, Detergents, Ferro Alloys Fertilizers, Fillers, Food Products, Herbs & Spices, Insecticides and Pesticides, Katha, Marine feeds, Minerals, Plastics, Pharmaceuticals, Resins, etc.

A heavy duty machine to pulverize Medium hard rocks, Minerals and Chemicals.
High fineness is possible from 100 mesh to 350 mesh (150 to 40 microns) and in some cases up to 500 mesh.
Since a Screen less classifier is used, the possibility of chocking or jamming is ruled out.
In built fan, cyclone and dust collector ensure dust free operation.

A specially designed Pulveriser with cyclone and dust collector suitable for spices and material like ayurvedic herbs etc.
Easily changeable screen is provided to get material of different fineness.
Specially shaped ‘M’ type hammers give high production under cool condition.
Pollution free working due to properly designed cyclone.
No RCC foundation is required if fixed on a specially designed AVM pad frame.

Most suitable machine for getting granules out of the brittle and hard material with very low fines generation.
Very hard rolls of alloy steel to crush even the hardest material.
Tooth types of Roll Crushers are also available with the same roll sizes.
Separate drive for each roll is given so that rolls break the particles with minimum friction.
No RCC foundation is required if fixed on a specially designed AVM pad frame.
Application: Emery, Glass, Quartz, Ceramic in granule etc.

Very much suitable to break the lumps into small pieces and when the material is brittle or soft.
A versatile and economical machine when size reduction ratio is high but the required production is low.
Most suitable range for the lumps which are to be broken is between 5 to 30mm.
Different material of construction is available like high manganese steel, stainless steel etc., to suit the material physical properties.

Assembled with Heavy duty steel structures.
Available in Inclined model, suitable for truck loading.
Available in mobile model, can be shifted anywhere
Pre-assembled with Idlers, Rollers etc.
Heavy duty spherical roller bearings

To convey the material vertically upward either feed some machine or storage silos etc. even up to a height of mtrs., conveying up to 50 tons per hour. The buckets may be mounted on chain, or on nylon cord rubber belt

Pre-assembled with heavy duty Screw Flights.
Heavy duty roller bearings
Sub-drive through Worm Reduction Gear Box.
Capacity : Up to 20 ton per hour

Very widely preferred machine for mixing and blending solid-to-solid different powders or to blend a small quantity of liquid with huge quantity of powder.
Most economical way of mixing the powder if the moisture contain is not high.
Available in different construction like SS 304, SS 316 etc.
If require, heating or cooling jacket may be provided.

This is most suitable machine for mixing the pasty, thick material in a uniform way. this consists two shafts of 'Z' shapes blades moving in opposite direction at different speeds, available in stainless steel construction also and jacketing for cooling or hating may be provided.

Precious Cone Mixer Cum Blenders may be either in M.S. or S.S. as the requirement may be the central part of the vessel is cylindrical while the ends are of conical shape. At the tip of one of the cone there is a feed mouth while at the tip of another cone a discharge gate with butterfly or some other type of valve is provided. The double conical vessel rotates with the filled material, with the help of gear box and electric motor. Because of its particular shape material moves not only up and down but has steering effect which gives a good homogenous mixing/blending of the powders.

Precious Vibrating screens are constructed from M.S prime plate with perforated / woven screens, supported on 8 heavy springs at its 4 legs, drive through eccentric shaft. The discharge chutes are separate for each deck of screen and suitable feed hopper at one of the end

Rotery screen constructed out of perforated plate alongwith center shaft supported on heavy bearings, drive through crown and pinion gear covered at top with discharge chute.

Working on the Gyratory Vibration with the help of eccentrically loaded motor, noiseless and maintenance free operation, mirror finish for S.S.contact parts. For easy flow of material, clamped easily replaceable screens.

In this type of dust collection system, dust bags are being shaken by the (pulse) weave of compressed air at regular interval, which is being control, by a timer. Further the fabric of the bags are being taken with less porousity, hence the system restrict more finer material at the surface of the bags. Hence only clean air goes to the atmosphere.