Special Features of Single Piece Screw/Plain End.
1. One Piece Top Entry ball valve is manufactured from polypropylene, a chemically inert thermoplastic.
2. One piece ball valve is specially suited for Drip Irrigation System and Sugar Industries.
3. One-piece rugged body eliminates joints / unions / Gaskets / Fasteners and consequently eliminates leakage and corrosion. Fewer Parts lower inventory of spares.
4. On line maintenance possible as all internals can be replaced without removing the valve from the pipe-line.
5. Since this ball valve contains no metal parts, failure due to corrosion eliminated.Widely used by chemical industries.
6. Excellent ultraviolet resistivity due to presence of carbon black.
7. Proper care taken for full strength and leakage proof manufacturing design.
8. Hydraulically tested at 10kg./cm²
9. Approved and under use by many renowed Drip Irrigation manufacturers.

Special Features of Solid Seal Screw/Plain End. (Krishika Type)
1. Solid seal ball valve is manufactured from polypropylene, a chemically inert thermoplastic.
2. One piece ball valve is specially suited for Drip Irrigation System and Domestic.
3. One-piece rugged body eliminates joints / unions / Gaskets / Fasteners and consequently eliminates leakage and corrosion. Fewer Parts lower inventory of spares.
4. Since this ball valve contains no metal parts, failure due to corrosion eliminated.Widely used by chemical industries.
5. Excellent ultraviolet resistivity due to presence of carbon black.
6. Proper care taken for full strength and leakage proof manufacturing design.
7. Hydraulically tested at 10kg./CM².

Special Features of Union Type Assembly Screw/Plain End.
1. Union Assembly ball valve is manufactured from polypropylene, a chemically inert thermoplastic.
2. Union Assembly ball valve is specially suited for Drip Irrigation System and Sugar Industries.
3. On line maintenance possible in this ball valve as all internals can be replaced without removing the valve from the pipe-line.
4. Union Assembly ball valve contains no metal parts, failure due to corrosion eliminated.Widely used by chemical industries.
5. Union Assembly ball valve possess excellent ultraviolet resistivity due to presence of carbon black.
6. Proper care taken for full strength and leakage proof manufacturing design.
7. Hydraulically tested at 10kg./cm².
8. Union Assembly Ball Valve is approved and used by many renowed drip Irrigation manufacturers.

Special Features of Union Assembly Screw/Plain End. (Prince Type)
1. Union Assembly ball valve is manufactured from polypropylene, a chemically inert thermoplastic.
2. Union Assembly ball valve is specially suited for Drip Irrigation System and Sugar Industries.
3. On line maintenance possible in this ball valve as all internals can be replaced without removing the valve from the pipe-line.
4. Union Assembly ball valve contains no metal parts, failure due to corrosion eliminated.Widely used by chemical industries.
5. Union Assembly ball valve possess excellent ultraviolet resistivity due to presence of carbon black.
6. Proper care taken for full strength and leakage proof manufacturing design.
7. Hydraulically tested at 10kg./cm².
8. Union Assembly Ball Valve is approved and used by many renowed drip Irrigation manufacturers.

Special Features of Three Piece Flange End (Black)
1. Available in Flange Type in 15 mm to 150 mm and in Screw Type in 15 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 15 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
6. Flange drilled as per customer's specification.
7. Exelent U.V. stabilty due to presence of carbon black.
8. Heavy duty valve can last for years after installation.

Special Features of Three Piece Screw End (Black)
1. Available in Flange Type in 15 mm to 150 mm and in Screw Type in 15 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 15 kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
6. Exelent U.V. stabilty due to presence of carbon black.
7. Heavy duty valve can last for years after installation.

Flush Valves Plain End (Black).

Special Features of Three Piece Flange End. (White)
1. Available in Flange Type in 15 mm to 150 mm and in Screw Type in 15 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90ºC Temp.
4. Hydraulically and Pneumatically tested for 15 Kg. upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
6. Flange drilled as per customer's specification.

Special Features of Three Piece Screw End. (White)
1. Available in Flange Type in 15 mm to 150 mm and in Screw Type in 15 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 15 Kg.
5. Protective and Resistive from most of the corrosive Chemicals.

Sight Glass
Size 25mm. to 100mm.
Material Polypropylene, HDPE
Available Length 4" & 3"

Special Features of Diaphragm Flange End.
1. One piece rugged body haveing lower rifb connecting both Flanges makes the valve absolutely strong enough to withstand external and internal loads developed on a pipeline.
2. Latest inverted type Diaphragm remains unstressed while the valve is in closed condition. This plus point makes the life of Diaphragm double than the conventional old type Diaphragm available in market.
3. Deeper seat allows maximum flow through valve and gives excellent throutling charcteristics
4. The perfectly matched seat and compressor gives bubble tight closer even in solurry applications, and with a single hand torque valve can be closed against 10 Kg/CM² pressure.
5. Available with Neoprene, Teflon coated or pure teflon Diaphragm.
6. Poonam Valves are Saunders 'A' Type available with flanged ends to BS Table 'D', 'E', ANSI-150 and DIN Std. Flange drillings in Screwed ends to BSP.
7. Every Assembled Diaphragm Valve undergoes functional and pressure testing of body and seat hydrotest of 6" upto 10 Kgbefore despatch.
8."POONAM" Diaphragm valves are ideally suited to the handling of severely contaminated, aggressive and non-aggressive media. Application in Water Treatment (Ion-Exchanger), Desalination, Sew-age Treatment, Electroplating, Photography, Electronics, Chemical and Food Industries are just a few of the countless examples
9. Hydraulically Tested - Body & Seal at 10Kg. (165psi)
10. Flange Drilled to table D.BS - 10

Special Features of Diaphragm Valve Screw End.
1. One piece rugged body haveing lower rifb connecting both Flanges makes the valve absolutely strong enough to withstand external and internal loads developed on a pipeline.
2. Latest inverted type Diaphragm remains unstressed while the valve is in closed condition. This plus point makes the life of Diaphragm double than the conventional old type Diaphragm available in market.
3. Deeper seat allows maximum flow through valve and gives excellent throutling charcteristics.
4. The perfectly matched seat and compressor gives bubble tight closer even in solurry applications, and with a single hand torque valve can be closed against 10 Kg/CM² pressure.
5. Available with Neoprene, Teflon coated or pure teflon Diaphragm.
6. Poonam Valves are Saunders 'A' Type available with flanged ends to BS Table 'D', 'E', ANSI-150 and DIN Std. Flange drillings in Screwed ends to BSP.
7. Every Assembled Diaphragm Valve undergoes functional and pressure testing of body and seat hydrotest of 3" upto 10 Kg before despatch.
8."POONAM" Diaphragm valves are ideally suited to the handling of severely contaminated, aggressive and non-aggressive media. Application in Water Treatment (Ion-Exchanger), Desalination, Sew-age Treatment, Electroplating, Photography, Electronics, Chemical and Food Industries are just a few of the countless examples
9. Hydraulically Tested - Body & Seal at 10Kg. (165psi).
10. Flange Drilled to table D.BS - 10

Special Features of Non Return Valves Flange End.
1. Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 10 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.

Special Features of Butterfly Valves.
1. Available size in 50 mm to 200 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 15Kg./CM².
5. Protective and Resistive from most of the corrosive Chemicals.
6. Flange drilled as per customer's specification.

Special Features of Foot Valves Flange End.
1. Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 10 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.

Special Features of Foot Valves Flange End.
1. Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 10 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.

Available M.O.C.: P.P.C.P.

Pipe End (Long Neck)
Size 20mm. to 500mm.
Material Polypropylene, HDPE
Available in all class of pipe standard

Pipe End (Short Neck)
Size 20mm. to 500mm.
Material Polypropylene, HDPE
Available in all class of pipe standard

Flange
Size 20mm. to 630mm.
Material Polypropylene, HDPE
Also available in table 'D', 'E', 'F' ASA 150 or as specified
Blind Flange
Size 20mm. to 315mm.
Material Polypropylene
Also available in table 'D', 'E', 'F' ASA 150 or as specified

Flange
Size 20mm. to 315mm.
Material Polypropylene
Also available in table 'D', 'E', 'F' ASA 150 or as specified
Blind Flange
Size 20mm. to 315mm.
Material Polypropylene
Also available in table 'D', 'E', 'F' ASA 150 or as specified

End Cap
Size 20mm. to 315mm.
Material Polypropylene, HDPE
Available in all class of pipe standard

Reducing Bushes
Important Parameters of Valves

Bends
Size 20mm. to 160 mm.
Material Polypropylene, HDPE

Tees
Size 20 mm. to 160 mm.
Material Polypropylene, HDPE

PP Service Saddle
Size 40,50,63,75,90,110,125,140,160,200 X 15/20/25
Material Polypropylene
160,200 will be Lunching in the market.

Air Release Cum Vacuum Relief Valves
Size 25mm
Material Polypropylene
Instant Vacuum Relief Protects irrigation systems and components. Removable top for seal maintenance. Bright colors cap allows easy visibility. Easy to install.

Literal Pipe Fitting.
Item Size
Literal Cock (TAP) 16mm
Literal Cock (TAP) 12mm
Reducing Literal Cock 16mm x 12mm
Literal Tee 16mm
Literal Tee 12mm
Reducing Tee 16mm x 12mm

Special Features of Poonam Compressor Fitting
Threads:
1. Can not cross-thread
2. Saw resist pull out and prevent unscrewing due to vibration
Flexible Grip Ring:
1. Keeps the 'D' ring in place
2. When the nut is removed, grip ring is completely free on the pipe
3. Easy to remove, no tools needed
4. Grips the pipe firmly, when the nut is tightened
'D' Ring:
1. Can not fall out of the fitting
2. Will not twist when the pipe is inserted
3. Makes fitting easy maintained, can be taken out and cleaned