Silicone free - hence no further painting related problems due to Silicone
Grinding & Chipping - Time consuming & Labourious process - NOT required to remove spatters
Slags are easily removed
Cleaning cost is drastically reduced - around 75%
Increase productivity - by 10%
Increase in welder's efficiency - by 25%
Gives dense & clean weld joint
Gaseous & non-metallic inclusions are minimized
Spatters removes gently – maintaining smooth parent surface
Depth of penetration is increased
Acts as a temporary rust preventive (hence useful in avoiding V-groove flash rusting & hence discards re-grinding of V-groove before welding )

Features :

Non Toxic
Non Flammable
Odorless
Silicon Free
Does not cause porosity 

Application Procedure :

SpatFree TM – Nozzle creates an Anti-Spatter film on welding gun nozzles Cool the Nozzle gun and remove the impurities Remove spatters around the contact tip and inside the nozzle.

Dip gun nozzle in to SpatFree TM – Nozzle and start work operations.
Brush onto positioners and fixtures. Avoid build up of SpatFree TM – Nozzle in the diffuser by storing the torch in a downward direction when not in use.

Packing : 300 gm bottle and 4 kg jar

Caution : Avoid contact with eyes as the material is slightly discomforting to the eyes. Avoid prolonged skin contact as it may cause drying of the skin. Use in a well ventilated area, however, SpatFree TM – Nozzzle is not normally a hazard due to the non-volatile nature of the product.