Double walled - Inner chamber SS - Outer MS , Puff insulation, Full length inner Plexi glass door for clear inner view, Outer metal door with magnetic gaskets & lock. Perforated SS removable trays at adjustable distance; preset electronic dual display (one for set point and other for process value) digital controller cum indicator with pt 100 as sensor. Pilot lamps for all switches & controls, illumination provided for inner chamber with forced air circulation fan for uniform temperature throughout the chamber Hermetically sealed compressor unit; castor wheels for easy move ability

Also known as Environmental Test Chambers /Humidity Control Ovens – Double Walled – Inner SS – Outer MS – 3” Gap Puff insulation; Full length inner glass door for clear inner vies – Outer metal door with magnetic gaskets & lock. Forced air circulation for uniform temperature throughout the chamber. Dual display preset electronic digital Temperature controller Cum Indicator with cooling system by means of Hermetically sealed Compressor Unit coupled with evaporation Coil and Condenser. Temp. Range 10ºC to 60ºC 1ºC; Humidity Range 40% Rh to 90% Rh 3% Rh.

Low temperature freezers are designed for freezing and storing of serum, vaccines, biological and medical specimens, clinical samples etc. at low temperature.

Double walled construction, exterior M.S. finished with powder coating epoxy paint, PUF Insulation, Inner chamber S.S. Separate Plexi Glass Doors for each compartment. 

Temperature Range: AMB to -20ºC and AMB to -40ºC, Accuracy: 2ºC




Temperature Controller: Digital display temperature indicator cum controller with audio visual alarm.

Double Walled Inner SS / Outer MS; Temperature Range: 10ºC to 60ºC0.5ºC Controlled by preset dual display electronic digital temperature controller cum indicator; RPM Range: 50 to 250 RPM Orbital (25 cms) Variable Speed Controlled by Digital Display RPM Controller cum Indicator (Permanent Management DC Motor) Complete with St. Steel Tray with lotus shaped spring action clamps but without Conical Flasks. 

Mild steel exterior finished with powder coating paint. Bath chamber and Bath lid made of S.S. Immersion type heaters for accuracy of temperature, with PUF insulation. Temperature control by Digital Display Temperature Controller cum Indicator. Choice of Stirrer / and or with Circulating pump. Choice of Table Top and Floor Models are available.

Optional Accessories
· Microprocessor based controller with printing interface & data

Double Walled – Outer MS – Inner MS or Stainless Steel;
80/20 Ni Heating elements placed at bottom; Temperature 
Range 5ºC above ambient to 80ºC controlled by sensitive Thermostat,
Built in glass window in the front door is provided for inner observation 
230V AC Mains 50 HZ.
Also provided with Temperature Safety Controller.

Double Walled – Outer MS – Inner MS or Stainless Steel; 80/20 Ni Heating elements placed at bottom and two vertical sides for uniform heating and arrangement for fixing L shape Thermometer facing top front side. Temperature Range 5ºC above ambient to 80ºC controlled by sensitive Thermostat, Built in glass window in the front door is provided for inner observation 230V AC Mains 50 HZ.  Also provided with Temperature Safety Controller.

Laminar Flow Cabinets complete with HEPA filter having efficiency of 99.997% down on 0.3% microns, pre filter 90% down to 5 microns, suitable motor blowing assembles, Working Table SS Top, Side Acrylic Panel, Fluorescent Tube Lights & Pressure Differential Manometer & Caster wheels. Available in Metallic Construction with attractive Epoxy Powder Coating Finish.