|
|
Dual Plate Check Valve |
Design Features
Design to API 594 and API 6D.
Metal to Metal Seat tightness is as per API 598 and on specification to API 6D.
85 Deg Door opening of Dual Plate Check Valves, offers minimum pressure drop as compared to conventional Swing/ Lift Check Valves.
Independent Torsion Spring prevents water hammer, this is a proven concept and edge over conventional valves.
Fire Safe Design, Cryogenic Tested design for Low Temperature and High Pressure design capabilities are the key features of Dual Plate Check Valves.
|
|
|
|
|
Non Slam Nozzle Check |
Design Features
Design to API 6D and Face to Face Distance as per manufacturer’s standards.
Fast acting spring prevents water hammer and pressure SURGE, this is a truly Non Slam Check Valves.
Short Travel and Ultra Light weight Disc make the functions of Non Slam Check Valves possible. Quick closing and fast traveling disc are the key design features.
High Velocity and Gas Flow under Compressed conditions some times reach sonic velocity and the sonic booms are detrimental to the valves. The simple but precisely calculated spring design over comes such problem.
Bernoulli’s equation of conservation of energy is the solution for spring design. Velocity head exchange the energy with Pressure Head and Non Slam Check keep on performing without the fear of sonic boom and valves offer least Pressure Drop when compared to Dual Plate Check Valves.
|
|
|
|
|
Single Disk Check Valve |
Features
These are best used at down stream of pump.
Used in Heating Installation, Steam Condensate Lines, Compressed Air Discharge Lines.
Used as, OEM by Boiler Manufacturers, Nitrogen and Gas Generating Equipment manufacturers, HVAC and other such equipment manufacturers use these valves extensively
|
|
|
|
|
Hub End Check Valve |
Design Features
Design to API 6D and Face to Face Distance as per manufacturer’s standards.
Hub Ends are available on Dual Plate Check Valve as well as Non Slam Axial Flow Check Valves.
Hub connections are used on Offshore and sub sea pipelines, where weight is a major design criteria.
Hub End Valves being lighter, saves weights – saves money, as compared to ANSI Flanged End Valves.
Hub Clamp are generally selected by the customer being proprietary design of Techlok, Grayloc and Vector Hub Clamp, Flovel will design and end connection suitably.
Clamp connections uses 4 bolts hence quick connection and installation as compared to ANSI Flanged End valves.
Clamp connection ensures proper clamping force resulting in no leakage during bending and vibrations which generally occurs in long pipelines.
Seal Ring profile is precisely machined using CNC machines and special inserts.
|
|
|
|
|
|
|
|
|